Home
Don't have an account? Create one now! It's always free!


Forgot Password
Ed's Auto Parts - Mention MOTORGEN for a Discount!
Motorgen Sponsor: McLeod Racing
Motorgen Sponsor: American Muscle - Add style and performance to your Stang
Motorgen Sponsor: Hall Fabrication & Racing
Motorgen Sponsor: Injectors Plus - Performance Fuel Delivery Systems
Reply
 
Thread Tools
Old 04-30-2008, 11:48 AM   #11
enkeivetteenkeivette is offline
Super Moderator
 
enkeivette's Avatar
 
Join Date: Dec 2007
Posts: 6,850
Default

Quote:
Originally Posted by SeanPlunk View Post
Ugg, what a day. Track was horrible as usual (and so was the driver). My first run I tried to slip the clutch with a 3k RPM launch. The car started hopping and then felt like something broke. I thought I had snapped a half-shaft. But then it felt fine again so I just went with it. I ran a 16 second pass. I had actually stopped at the start - bad times. My 2nd run I ran 13.52 @ 108mph. It was an okay pass, although I bogged out of the hole (2k launch). My 3rd run I launched at 2.5k rpm and lit the tires up again. I also missed the 2-3shift and ran 14 flat @ 102. Street tires are worthless. I wish also that I could actually get more runs in - it's very difficult to practice. For the time being though - I suck
You need a Pro 5.0 shifter. You can shift mine to see what it feels like if you want. 2 to 3 is like butter. It gets sucked right in.
  Reply With Quote
Old 04-30-2008, 03:20 PM   #12
SeanPlunkSeanPlunk is offline
Resident Avatar Gambler
 
SeanPlunk's Avatar
 
Join Date: Nov 2006
Posts: 5,997
Send a message via AIM to SeanPlunk
Default

Quote:
Originally Posted by enkeivette View Post
You need a Pro 5.0 shifter. You can shift mine to see what it feels like if you want. 2 to 3 is like butter. It gets sucked right in.
I have a shifter. The shifter isn't the problem, it's the way the clutch grabs.
  Reply With Quote
Old 04-30-2008, 03:46 PM   #13
VettezukiVettezuki is offline
I, Vettezuki
 
Vettezuki's Avatar
 
Join Date: Feb 2006
Posts: 14,754
Default

Quote:
Originally Posted by SeanPlunk View Post
I have a shifter. The shifter isn't the problem, it's the way the clutch grabs.
I love my hydraulic . . . it's like buttah.

But if your clutch is grabby, it might be a bit worn or your flywheel might have hard spots. Does it ever chatter when engaging?
__________________
Motorgen on
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Motorgen on
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Motorgen Project Car
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
(active)
Motorgen Project Car
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
(back burner)
  Reply With Quote
Old 04-30-2008, 05:11 PM   #14
enkeivetteenkeivette is offline
Super Moderator
 
enkeivette's Avatar
 
Join Date: Dec 2007
Posts: 6,850
Default

Quote:
Originally Posted by SeanPlunk View Post
I have a shifter. The shifter isn't the problem, it's the way the clutch grabs.
I was talking about missing your 2 to 3 shift. That would have nothing to do with the clutch.

What's wrong with the clutch?
  Reply With Quote
Old 04-30-2008, 07:05 PM   #15
SeanPlunkSeanPlunk is offline
Resident Avatar Gambler
 
SeanPlunk's Avatar
 
Join Date: Nov 2006
Posts: 5,997
Send a message via AIM to SeanPlunk
Default

Quote:
Originally Posted by enkeivette View Post
I was talking about missing your 2 to 3 shift. That would have nothing to do with the clutch.

What's wrong with the clutch?
My clutch is cable controlled and it engages funky. I need to adjust it again before going to the track. It engages too low, and sometimes you depress the clutch a great deal, but it still won't go into gear because you haven't hit the sweet spot yet.
  Reply With Quote
Old 04-30-2008, 07:11 PM   #16
enkeivetteenkeivette is offline
Super Moderator
 
enkeivette's Avatar
 
Join Date: Dec 2007
Posts: 6,850
Default

Quote:
Originally Posted by SeanPlunk View Post
My clutch is cable controlled and it engages funky. I need to adjust it again before going to the track. It engages too low, and sometimes you depress the clutch a great deal, but it still won't go into gear because you haven't hit the sweet spot yet.
After you launch, powershift! Seriously though, ever tried that? Or try not depressing the clutch, saves time for sure, but it can be tricky, rpms have to be right for the shift to engage. That's how I race my bike at the sand drags.
  Reply With Quote
Old 04-30-2008, 07:39 PM   #17
VettezukiVettezuki is offline
I, Vettezuki
 
Vettezuki's Avatar
 
Join Date: Feb 2006
Posts: 14,754
Default

Quote:
Originally Posted by enkeivette View Post
After you launch, powershift! Seriously though, ever tried that? Or try not depressing the clutch, saves time for sure, but it can be tricky, rpms have to be right for the shift to engage. That's how I race my bike at the sand drags.
A bike is a sequential. You can do it with a T56, but it's not for the faint of heart. At best, perfect execution might net a couple tenths. Failures will lose a lot more and gradually damage the trans. What does help is to not take your foot all the way out of the gas and to begin pulling out of gear before engaging the clutch. With practice, you can get quite fast, especially with a short throw shifter.
__________________
Motorgen on
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Motorgen on
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Motorgen Project Car
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
(active)
Motorgen Project Car
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
(back burner)
  Reply With Quote
Old 04-30-2008, 08:20 PM   #18
enkeivetteenkeivette is offline
Super Moderator
 
enkeivette's Avatar
 
Join Date: Dec 2007
Posts: 6,850
Default

Quote:
Originally Posted by Vettezuki View Post
A bike is a sequential. You can do it with a T56, but it's not for the faint of heart. At best, perfect execution might net a couple tenths. Failures will lose a lot more and gradually damage the trans. What does help is to not take your foot all the way out of the gas and to begin pulling out of gear before engaging the clutch. With practice, you can get quite fast, especially with a short throw shifter.
Yes you can. Doesn't need to be a sequential trans, you just have to get the rpms right. Ask me how I know. But granted, it's bad for the trans.
  Reply With Quote
Old 04-30-2008, 08:45 PM   #19
VettezukiVettezuki is offline
I, Vettezuki
 
Vettezuki's Avatar
 
Join Date: Feb 2006
Posts: 14,754
Default

Quote:
Originally Posted by enkeivette View Post
Yes you can. Doesn't need to be a sequential trans, you just have to get the rpms right. Ask me how I know. But granted, it's bad for the trans.
I said:

You can do it with a T56, but it's not for the faint of heart.
__________________
Motorgen on
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Motorgen on
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Motorgen Project Car
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
(active)
Motorgen Project Car
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
(back burner)
  Reply With Quote
Old 04-30-2008, 09:01 PM   #20
enkeivetteenkeivette is offline
Super Moderator
 
enkeivette's Avatar
 
Join Date: Dec 2007
Posts: 6,850
Default

Quote:
Originally Posted by Vettezuki View Post
I said:

You can do it with a T56, but it's not for the faint of heart.
Woops! My bad g money.
  Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -7. The time now is 04:19 AM.