|
|
 |
|
08-12-2009, 04:01 PM
|
#21
|
|
Fast & Filthy
Join Date: Jun 2008
Posts: 3,840
|
What size fuel injectors do you have now and what size are the new ones? Same goes for the MAF. Also, what is done to the engine besides a huge cam? What compression, heads, intake, etc.?
The E303 is a great cam. That's what I have in my Cobra.
|
|
|
|
|
08-12-2009, 10:35 PM
|
#22
|
|
Senior Member
Join Date: Aug 2009
Posts: 248
|
Quote:
Originally Posted by 94cobra69ss396
What size fuel injectors do you have now and what size are the new ones? Same goes for the MAF. Also, what is done to the engine besides a huge cam? What compression, heads, intake, etc.?
The E303 is a great cam. That's what I have in my Cobra.
|
I changed them out today and i have 19lb injectors, and the stock maf, but the sensor is matched for the injectors also. Stock compression, some cast iron heads that are ported to the same specs as AFR 185's, cobra upper and lower intake, bbk cold air intake, shorty equal length headers, bassani h pipe, flowmaster 40's, double roller timing chain, the block is not stock, its an aluminum sportsman block i think and i know all the internals are forged. Its a stout motor. The idle problem is a little better now that i installed matching smaller injectors and maf, but power band doesnt hit til 3k and it still likes to shut off on me when i put it in drive and reverse and whatnot. I checked all the grounds and vacuum lines and everything is good, no leaks whatsoever. |
|
|
|
|
08-12-2009, 10:47 PM
|
#23
|
|
I, Vettezuki
Join Date: Feb 2006
Posts: 14,754
|
Quote:
Originally Posted by 89StangGuy
I changed them out today and i have 19lb injectors, and the stock maf, but the sensor is matched for the injectors also. Stock compression, some cast iron heads that are ported to the same specs as AFR 185's, cobra upper and lower intake, bbk cold air intake, shorty equal length headers, bassani h pipe, flowmaster 40's, double roller timing chain, the block is not stock, its an aluminum sportsman block i think and i know all the internals are forged. Its a stout motor. The idle problem is a little better now that i installed matching smaller injectors and maf, but power band doesnt hit til 3k and it still likes to shut off on me when i put it in drive and reverse and whatnot. I checked all the grounds and vacuum lines and everything is good, no leaks whatsoever.
|
Aluminum block/iron heads. You don't hear that everyday.
__________________
Motorgen on
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Motorgen on
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Motorgen Project Car
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
(active)
Motorgen Project Car
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
(back burner)
|
|
|
|
|
08-12-2009, 10:53 PM
|
#24
|
|
Senior Member
Join Date: Aug 2009
Posts: 248
|
Quote:
Originally Posted by Vettezuki
Aluminum block/iron heads. You don't hear that everyday.
|
I know right ha. Couldn't afford any aluminum heads, the reciept he had for the motor equaled around 6 grand. I told him i only had 800 bucks. He said take it. I came to his house expecting to get a cobra upper and lower that were ported and some injectors. I ended up coming home with a new motor ha. I'm planning on changing them later down the road, but til then they flow just fine, just a little too heavy for my taste. |
|
|
|
|
08-12-2009, 10:55 PM
|
#25
|
|
I, Vettezuki
Join Date: Feb 2006
Posts: 14,754
|
Quote:
Originally Posted by 89StangGuy
I know right ha. Couldn't afford any aluminum heads, the reciept he had for the motor equaled around 6 grand. I told him i only had 800 bucks. He said take it. I came to his house expecting to get a cobra upper and lower that were ported and some injectors. I ended up coming home with a new motor ha. I'm planning on changing them later down the road, but til then they flow just fine, just a little too heavy for my taste.
|
After market will be lighter, but one of the other big deals is heat. Aluminum dissipates heat radically better than iron.
But wow, if you walked away with all that for $800, you did good.
__________________
Motorgen on
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Motorgen on
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Motorgen Project Car
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
(active)
Motorgen Project Car
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
(back burner)
|
|
|
|
|
08-12-2009, 10:56 PM
|
#26
|
|
Senior Member
Join Date: Aug 2009
Posts: 248
|
Forgot to add why i put the crappy heads, When i bought the motor off the guy he has some AFR 185's, but he said he wanted to keep them. So i went to my uncles house, got his heads machined and he let me have them. Pretty much got a bunch of hand me down parts.
|
|
|
|
|
08-12-2009, 11:25 PM
|
#27
|
|
Senior Member
Join Date: Aug 2009
Posts: 248
|
Quote:
Originally Posted by Vettezuki
After market will be lighter, but one of the other big deals is heat. Aluminum dissipates heat radically better than iron.
But wow, if you walked away with all that for $800, you did good.
|
Ya that's why i was kind of bummed, always gotta be turning my electric fan on ha. But yea it was no joke, guy who lived out in Palmdale, had a lot of money, and spare motors, he said if he didn't sell it all it would be doing is taking up space. So i think i made out pretty good with that deal. |
|
|
|
|
08-23-2009, 12:58 PM
|
#28
|
|
Fast & Filthy
Join Date: Jun 2008
Posts: 3,840
|
So we started the cam swap yesterday morning at around 9:30am. By 11:30am we had the cam out and discovered that he already had an E303.  So we broke for lunch and ran to Autozone to pick up a new seal for the timing cover. By 1:30pm we started working on it again and we fixed a bunch of other issues while we were at it. We didn't finish until around 12:30am but Mike's Mustang is running better now. He still needs to fix some exhaust leaks and a hole in his gas tank that we temperarily fixed last night. |
|
|
|
|
08-23-2009, 05:02 PM
|
#29
|
|
Graphics B*tch
Join Date: Dec 2006
Posts: 2,197
|
Ron you are the man!
__________________
Adam
'13 Ford Fusion SE (2.0L EcoBoost)(Conor)
'03 Zinc Yellow Mach 1(Yazmine)
290HP / 305TQ
1/4 mile ET: 13.28 @ 101MPH (1.867 60')
'99 White F-150 (4.6L)(Bud Jr.)-gone but never forgotten
|
|
|
|
|
08-23-2009, 05:50 PM
|
#30
|
|
Senior Member
Join Date: Aug 2009
Posts: 248
|
Yea, the car runs great now. The only thing is i actually have to end up getting a new gas tank this week. That epoxy stuff worked on the little pin hole on the bottom of the tank. But the bigger one on the other hand. I put a huge piece on it, let it sit for 5 hours this morning. As soon as i started pouring what little gas i had left in it, it started leaking. So I'm gonna try another temporary fix til i get get to a junkyard and pull one off. Thanks a lot again Ron. Your Cobra is sick btw ha. Laters
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
