Home
Don't have an account? Create one now! It's always free!


Forgot Password
Ed's Auto Parts - Mention MOTORGEN for a Discount!
Motorgen Sponsor: McLeod Racing
Motorgen Sponsor: American Muscle - Add style and performance to your Stang
Motorgen Sponsor: Hall Fabrication & Racing
Motorgen Sponsor: Injectors Plus - Performance Fuel Delivery Systems
Reply
 
Thread Tools
Old 02-10-2015, 07:43 PM   #11
Shaolin CraneShaolin Crane is offline
pain's fun, hit me again
 
Shaolin Crane's Avatar
 
Join Date: Sep 2009
Posts: 6,264
Default

Quote:
Originally Posted by Vettezuki View Post
I suppose the difference between a custom smoggable street cam and an off the shelf smoggable street cam is not going to be so large as to be dangerous around lean-out conditions where shit melts. The computer can adjust trim based on O2 to some degree. But it already doesn't warm start idle for shit, don't need that to take a dump any further. I'll look into it further once I know the condition of the block and heads.
Then you could bump the fuel pressure up as a bandaid if needed, but i'd say the half assing it ship has sailed. Either go with a straight up stock replacement, and hock it. Or do it all the way and keep it.
__________________
Quote:
Originally Posted by Bruce Lee
Forget about winning and losing; forget about pride and pain. Let your opponent graze your skin and you smash into his flesh; let him smash into your flesh and you fracture his bones; let him fracture your bones and you take his life. Do not be concerned with escaping safely — lay your life before him

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Stopping the world!
  Reply With Quote
Old 02-10-2015, 07:47 PM   #12
VettezukiVettezuki is offline
I, Vettezuki
 
Vettezuki's Avatar
 
Join Date: Feb 2006
Posts: 14,754
Default

It's tuned for, and ran fine on the cam I had other than crappy warm start idle, a common H&C problem from the olden times on the LS1. A stock cam wouldn't run very well, but one with specs close to what I had *should*. . .

But the cam that came out of it had no common manufacturer markings or numbers we could look up. A little bit of a mystery. It will have to be analyzed to confirm what the hell it actually was.
__________________
Motorgen on
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Motorgen on
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Motorgen Project Car
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
(active)
Motorgen Project Car
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
(back burner)
  Reply With Quote
Old 02-11-2015, 12:18 AM   #13
Shaolin CraneShaolin Crane is offline
pain's fun, hit me again
 
Shaolin Crane's Avatar
 
Join Date: Sep 2009
Posts: 6,264
Default

Then I'd say anything in an advertised range, regardless of lobe design will run just fine. However I would not run it for long without a tune. Figure even if you do have it tuned without having the exhaust done, its such a minute change that the computer should accommodate for it. Not ideal, but its better than nothing. If there was any time to have Jamie do the job, it would be now, whole hell of alot of time would be saved since everything is already out. I don't believe he has the ability to do side work at DT any more but I'm sure it could be done here at the shop. Do you have his contact info?
__________________
Quote:
Originally Posted by Bruce Lee
Forget about winning and losing; forget about pride and pain. Let your opponent graze your skin and you smash into his flesh; let him smash into your flesh and you fracture his bones; let him fracture your bones and you take his life. Do not be concerned with escaping safely — lay your life before him

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Stopping the world!
  Reply With Quote
Old 02-11-2015, 12:22 AM   #14
VettezukiVettezuki is offline
I, Vettezuki
 
Vettezuki's Avatar
 
Join Date: Feb 2006
Posts: 14,754
Default

You mean bench tune? The ECU is just in the back by the battery, I can get that any time. I may not be following you here.
__________________
Motorgen on
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Motorgen on
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Motorgen Project Car
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
(active)
Motorgen Project Car
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
(back burner)
  Reply With Quote
Old 02-11-2015, 12:35 AM   #15
Shaolin CraneShaolin Crane is offline
pain's fun, hit me again
 
Shaolin Crane's Avatar
 
Join Date: Sep 2009
Posts: 6,264
Default

What I'm saying is, if you have a cam that is now 224 now and go above or below 4-5* the ECU should accommodate enough for changes. We're not talking drastic changes, but it should be tuned. For the $300-400 it costs, it's a safe thing to do.

While the engine is out, and the manifolds, blah blah. Now would be time for Jamie to work his pipe magic and do the exhaust.
__________________
Quote:
Originally Posted by Bruce Lee
Forget about winning and losing; forget about pride and pain. Let your opponent graze your skin and you smash into his flesh; let him smash into your flesh and you fracture his bones; let him fracture your bones and you take his life. Do not be concerned with escaping safely — lay your life before him

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Stopping the world!
  Reply With Quote
Old 02-11-2015, 03:57 AM   #16
VettezukiVettezuki is offline
I, Vettezuki
 
Vettezuki's Avatar
 
Join Date: Feb 2006
Posts: 14,754
Default

Quote:
Originally Posted by Shaolin Crane View Post
What I'm saying is, if you have a cam that is now 224 now and go above or below 4-5* the ECU should accommodate enough for changes. We're not talking drastic changes, but it should be tuned. For the $300-400 it costs, it's a safe thing to do.

While the engine is out, and the manifolds, blah blah. Now would be time for Jamie to work his pipe magic and do the exhaust.
Oh, do the exhaust while the engine is out. Well. the block is at the shop. Sorry to be dense here but I figr'd he'd want the car with the engine in it to see the clearances with suspension, etc. I remember investigating this years ago and the reason custom is basically just required is that, AIR, is that the exits from #1/2 are very narrow to the control arms.
__________________
Motorgen on
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Motorgen on
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Motorgen Project Car
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
(active)
Motorgen Project Car
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
(back burner)
  Reply With Quote
Old 02-11-2015, 09:15 AM   #17
Shaolin CraneShaolin Crane is offline
pain's fun, hit me again
 
Shaolin Crane's Avatar
 
Join Date: Sep 2009
Posts: 6,264
Default

Quote:
Originally Posted by Vettezuki View Post
Oh, do the exhaust while the engine is out. Well. the block is at the shop. Sorry to be dense here but I figr'd he'd want the car with the engine in it to see the clearances with suspension, etc. I remember investigating this years ago and the reason custom is basically just required is that, AIR, is that the exits from #1/2 are very narrow to the control arms.
Well yes, he needs it in the car, but, his major bitch with vettes, and lsx cars in general is the amount of time it takes to remove everything like the coil packs, manifolds, etc

So the engine should be in and mounted but that's it. Would make the whole process alot quicker, which I'm sure means cheaper, but I can't say for certain. Do you have his number?
__________________
Quote:
Originally Posted by Bruce Lee
Forget about winning and losing; forget about pride and pain. Let your opponent graze your skin and you smash into his flesh; let him smash into your flesh and you fracture his bones; let him fracture your bones and you take his life. Do not be concerned with escaping safely — lay your life before him

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Stopping the world!
  Reply With Quote
Old 02-13-2015, 12:02 AM   #18
VettezukiVettezuki is offline
I, Vettezuki
 
Vettezuki's Avatar
 
Join Date: Feb 2006
Posts: 14,754
Default

PM or text with his info. I'd just take the car to him complete and pay for the work to be done, including mod of the cross member as mind is a little Mad Max at present.
__________________
Motorgen on
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Motorgen on
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Motorgen Project Car
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
(active)
Motorgen Project Car
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
(back burner)
  Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -7. The time now is 10:56 AM.