[silvertermi04]

Well there is to many forum sections on here. I dont know if this is the right place or not but whatever here it goes. I had forgotten about u guys i had made the thread and posted it up on a couple of other forums but not here but now i will since my face is in the RX7 project car lol

Well guys here it is, i will be making updates as i go. Hopefully u guys will like it. Ill have pics and vids. Ill try to make it as best possible.

For u guys i made it a little different since i have not mett many of u guys, here is a link first for my fist part of the upgrades before the ones that have happened in the past couple of weeks. My myspace is not private so u guys should have not problem seeing the pics.
http://viewmorepics.myspace.com/inde...lbumId=1728499


First pics are from a little clean up i did to the car when i found out i had a little brake squeak, dont know if u guys remember.




Some of the parts after clean up

BEFORE

AFTER


THE FRONT CALIPERS GOT UPGRADED TO 10TH ANNIVERSARY RED ONES BUT THE BACK ONES NEEDED SOME LOVE FROM THE SPRAY CAN.


A LITTLE BLACK (DONT MIND THE RED AND BLACK PAINT ON THE ROTORS SINCE THEY WERE BEING REPLACED)

ALOT OF RED


SOMEWHAT FINISHED PRODUCT


HERE IS THE FINISHED PRODUCT IN THE BACK. THE OVER SPRAY PAINT ON THE HOSES AND ON SOME OF THE SUSPENSION COMPONENTS CLEANED UP LOL OHH AND NEW PADS IN THE BACK AS WELL


FRONT ONES BEFORE

FRONT BRAKE SETUP, SO HERE U GO. THIS IS WITH THE 10TH ANNIVERSARY CALIPERS UP FRONT.



OK NOW TO THE NEW EXHAUST

I DID NOT HAVE A PIC OF THE BORLAS I PUT ON SO I STOLED ONE AND COPIED IT LOL

HERE IS THE VID I MADE ON SATURDAY AS WELL BEFORE THE INTALL, DONT MIND MY YOUNGER BROTHER'S COMENTARY

YouTube - Borla mufflers and magnaflow x pipe

THESE ARE THE MAGNAPACKS THAT WENT ON THE CAR THIS PAST SATURDAY.


AND THE SHORT CLIP OF THE EXHAUST AFTER THE INSTALL

YouTube - Magnapacks

OK guys check it out and let me know what u guys think, i will upload some more as the parts go on, im still missing from installing the springs the caster camber plates the full length sub frame connectors my new tires and the 18" inch Saleens if the guy still sell them to me. This is all for tonight lates.


2/20/9
OK well guys im back at it we are going to show u the intalls of the H&R springs as well as the MM Caster Camber Plates and the 4 new tires that went on the car.
First off a couple of pics of the car at daves shop and the parts that are going to go on the car.




OK HERE IS THE PICTURES OF THE SPRINGS AND CASTER CAMBER PLATES.

THE H&R RACE SPRINGS


THE MM CASTER CAMBER PLATES. EVERYTHING LAID OUT AND READY

ALL THE NUTS AND BOLTS THAT COME WITH THE KIT.

ALL THE STOCK STUFF OUT AND READY FOR THE NEW STUFF TO GO IN.


BOTH FRONT SPRINGS IN


THIS IS THE REAR SPRINGS BACK IN.



I WILL HAVE PICS OF THE CASTER CAMBER PLATES AND THE MM FLSC AFTER WE DO THE INTALL OF THEM PLUS THE ALIGNMENT AS WELL AS THE 4 NEW NITTO TIRES.

[SeanPlunk]

Everything looks great Jose, nice and clean.

I meant to ask you last night, how is the ride with the lowering springs? It's something I would consider at some point but I'm not interested in making the ride insanely stiff or anything like that.

[Vettezuki]

I kinda thought "User Project Cars" was pretty clear, but hey, you're a Ford owner. Just kidding. Great thread!


BTW, why don't you add your Cobra to your garage? Here's how.

Then it will be searchable under Member Rides, like my totally awesome Vette.

[silvertermi04]

Thanks guys and ill try and do that vettezuki

[SeanPlunk]

Originally Posted by silvertermi04

Thanks guys and ill try and do that vettezuki

What's left to be done on this round of mods?

[enkeivette]

[silvertermi04]

Originally Posted by SeanPlunk

What's left to be done on this round of mods?

Well the Tires i put them on sat. u saw them at Nick's I dint put any pics cause i still have to do the alignment and the MM Full Length Subframe Connectors. Hopefully tonight and after that im done. In a few months with some cash in hand i will get the whole bushing kit for everything. I dont like using credit cars so everything i buy is payed with cash in hand or in the checking accout. lol As far as power i think i might do the 2# lower pulley as well as a small shot of the Sauce like 50 shot is what im thinking.

[silvertermi04]

Originally Posted by enkeivette

Thanks, and right back at u man.

[SeanPlunk]

Originally Posted by silvertermi04

Well the Tires i put them on sat. u saw them at Nick's I dint put any pics cause i still have to do the alignment and the MM Full Length Subframe Connectors. Hopefully tonight and after that im done. In a few months with some cash in hand i will get the whole bushing kit for everything. I dont like using credit cars so everything i buy is payed with cash in hand or in the checking accout. lol As far as power i think i might do the 2# lower pulley as well as a small shot of the Sauce like 50 shot is what im thinking.

Will a 2# lower overspin the blower with a 2.76 upper, or will you still see gains?

[silvertermi04]

With a 2.73 up top they say to go #2 lower if u have like a 2.93 and i think also if u have the 2.8 then u need to go with the #4 lower.