Home
Don't have an account? Create one now! It's always free!


Forgot Password
Ed's Auto Parts - Mention MOTORGEN for a Discount!
Motorgen Sponsor: McLeod Racing
Motorgen Sponsor: American Muscle - Add style and performance to your Stang
Motorgen Sponsor: Hall Fabrication & Racing
Motorgen Sponsor: Injectors Plus - Performance Fuel Delivery Systems
Reply
 
Thread Tools
Old 03-17-2016, 10:49 AM   #1
enkeivetteenkeivette is offline
Super Moderator
 
enkeivette's Avatar
 
Join Date: Dec 2007
Posts: 6,850
Default Brake Master Cylinder Physics

A stock C3 master cylinder is a 1.125" bore. A stock C5 master is a 1" bore. Apparently it's a bolt in swap, and a lot of guys do it, but... Ummm... Isn't that a step back?

I understand the booster provides assist only, and so upgrading the booster really does nothing for braking force effectively.

And with the same pushrod actuation it seems that a C5 master would produce slightly less hydraulic psi per inch.

So, is upgrading braking force really just a matter of better calipers and larger diameter rotors?


Sent from my iPhone using Tapatalk
__________________
I <3 forced induction.
  Reply With Quote
Old 03-17-2016, 10:52 AM   #2
enkeivetteenkeivette is offline
Super Moderator
 
enkeivette's Avatar
 
Join Date: Dec 2007
Posts: 6,850
Default

I just bought some Kore3 brackets to get Carlos' Z51 brakes on my car (finally) and I'm wondering if I should be upgrading anything else. Especially since my booster is acting up.


Sent from my iPhone using Tapatalk
__________________
I <3 forced induction.
  Reply With Quote
Old 03-17-2016, 10:53 AM   #3
enkeivetteenkeivette is offline
Super Moderator
 
enkeivette's Avatar
 
Join Date: Dec 2007
Posts: 6,850
Default

I'm even wondering if I should be searching for maybe a Chevy truck master with a larger bore, to up the psi in an effort to mimic the C6 setup a bit better.


Sent from my iPhone using Tapatalk
__________________
I <3 forced induction.
  Reply With Quote
Old 03-17-2016, 07:22 PM   #4
VettezukiVettezuki is offline
I, Vettezuki
 
Vettezuki's Avatar
 
Join Date: Feb 2006
Posts: 14,754
Default

I know guys have had a lot of trouble trying to frankenstein a C5 brake system into a C3 and the issue was mismatched bore and stroke of the calipers to the MC AIR. Basically the system should be kept integrated on spec. Someone who understands the hyradulics better could explain it, but it's not so trivial. Let's put it this way, guys ended up with brakes considerably LESS effective than stock C3 by just throwing on a set of C5 calipers. That's what I remember.

Doesn't Wildwood make a complete C3 brake system now, allowing for 15" rotors, etc. ? I know there was another company that made a whole custom system, and this was like ten years ago now, that was shit hot, but it was like $5k by the time you were done. I think it included new hubs and everything.
__________________
Motorgen on
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Motorgen on
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Motorgen Project Car
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
(active)
Motorgen Project Car
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
(back burner)
  Reply With Quote
Old 03-17-2016, 09:49 PM   #5
Shaolin CraneShaolin Crane is offline
pain's fun, hit me again
 
Shaolin Crane's Avatar
 
Join Date: Sep 2009
Posts: 6,264
Default

I used a calculator that specs out the size of the pistons in the calipers, rotor size, and says what's needed in terms of bore.

There's no "step back" just what's needed. If you increase the surface are of the calipers, you'll need to move more fluid, which would require a smaller bore. Yada Yada...
__________________
Quote:
Originally Posted by Bruce Lee
Forget about winning and losing; forget about pride and pain. Let your opponent graze your skin and you smash into his flesh; let him smash into your flesh and you fracture his bones; let him fracture your bones and you take his life. Do not be concerned with escaping safely — lay your life before him

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Stopping the world!
  Reply With Quote
Old 03-17-2016, 09:50 PM   #6
Shaolin CraneShaolin Crane is offline
pain's fun, hit me again
 
Shaolin Crane's Avatar
 
Join Date: Sep 2009
Posts: 6,264
Default

Quote:
Originally Posted by Vettezuki View Post
I know guys have had a lot of trouble trying to frankenstein a C5 brake system into a C3 and the issue was mismatched bore and stroke of the calipers to the MC AIR. Basically the system should be kept integrated on spec. Someone who understands the hyradulics better could explain it, but it's not so trivial. Let's put it this way, guys ended up with brakes considerably LESS effective than stock C3 by just throwing on a set of C5 calipers. That's what I remember.

Doesn't Wildwood make a complete C3 brake system now, allowing for 15" rotors, etc. ? I know there was another company that made a whole custom system, and this was like ten years ago now, that was shit hot, but it was like $5k by the time you were done. I think it included new hubs and everything.
My fam over at R1 concepts now has a modular design brake system and can be fitted to any vehicle, I think the front is about $2X00 for a two piece rotor and 6 piston caliper.
__________________
Quote:
Originally Posted by Bruce Lee
Forget about winning and losing; forget about pride and pain. Let your opponent graze your skin and you smash into his flesh; let him smash into your flesh and you fracture his bones; let him fracture your bones and you take his life. Do not be concerned with escaping safely — lay your life before him

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Stopping the world!
  Reply With Quote
Old 03-17-2016, 10:20 PM   #7
Shaolin CraneShaolin Crane is offline
pain's fun, hit me again
 
Shaolin Crane's Avatar
 
Join Date: Sep 2009
Posts: 6,264
Default

Here ya go, do the math and you'll know exactly what you need. Your front calipers have 40.5mm pistons.
http://www.outlawdiscbrakes.com/faq.html
__________________
Quote:
Originally Posted by Bruce Lee
Forget about winning and losing; forget about pride and pain. Let your opponent graze your skin and you smash into his flesh; let him smash into your flesh and you fracture his bones; let him fracture your bones and you take his life. Do not be concerned with escaping safely — lay your life before him

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Stopping the world!
  Reply With Quote
Old 03-17-2016, 11:25 PM   #8
enkeivetteenkeivette is offline
Super Moderator
 
enkeivette's Avatar
 
Join Date: Dec 2007
Posts: 6,850
Default

Ya, the math? With all those known figures and known equations... I'll get right on that

Options are 1.125 vs 1, so of the 1 moves more fluid, math is done.

I've heard of c5 calipers being a step back too. I've also heard the opposite. I'm thinking that's a proportioning issue. If front calipers suddenly take more fluid to actuate the same, it would shift bias to the rear. Causing the braking force to of course feel weaker. The added pedal effort to more the larger bore calipers alone would also seem to have the same effect. The solution would be more psi, more assist.


Sent from my iPhone using Tapatalk
__________________
I <3 forced induction.
  Reply With Quote
Old 03-17-2016, 11:37 PM   #9
Shaolin CraneShaolin Crane is offline
pain's fun, hit me again
 
Shaolin Crane's Avatar
 
Join Date: Sep 2009
Posts: 6,264
Default

Quote:
Originally Posted by enkeivette View Post
Ya, the math? With all those known figures and known equations... I'll get right on that

Options are 1.125 vs 1, so of the 1 moves more fluid, math is done.

I've heard of c5 calipers being a step back too. I've also heard the opposite. I'm thinking that's a proportioning issue. If front calipers suddenly take more fluid to actuate the same, it would shift bias to the rear. Causing the braking force to of course feel weaker. The added pedal effort to more the larger bore calipers alone would also seem to have the same effect. The solution would be more psi, more assist.


Sent from my iPhone using Tapatalk
Actually your options are plenty, bendix is the OE for everyone. Figure out if you have standard or metric threads and you can use whatever you want. 93-95 Cobras are 15/16, 94-95 GT's are 1" V6's are 1 1/16" etc. They have been used on damn near everything.
__________________
Quote:
Originally Posted by Bruce Lee
Forget about winning and losing; forget about pride and pain. Let your opponent graze your skin and you smash into his flesh; let him smash into your flesh and you fracture his bones; let him fracture your bones and you take his life. Do not be concerned with escaping safely — lay your life before him

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Stopping the world!
  Reply With Quote
Old 03-18-2016, 12:44 AM   #10
Shaolin CraneShaolin Crane is offline
pain's fun, hit me again
 
Shaolin Crane's Avatar
 
Join Date: Sep 2009
Posts: 6,264
Default

Alright I did the math for you, your new calipers measure at 3.99sqi vs the stock c3 calipers at 2.76sqi, so your most reactive pedal would be a 15/16.

Which means you might need one of these too, which I just so happen to have.
http://www.jegs.com/i/Wilwood/950/26...gwixoCNlHw_wcB
__________________
Quote:
Originally Posted by Bruce Lee
Forget about winning and losing; forget about pride and pain. Let your opponent graze your skin and you smash into his flesh; let him smash into your flesh and you fracture his bones; let him fracture your bones and you take his life. Do not be concerned with escaping safely — lay your life before him

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Stopping the world!
  Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -7. The time now is 08:22 AM.