Intercooler installed at about 20 degrees. Not ideal, but there's only so much goodness that can be squeezed into a tiny car. It's a 4x31x12 bar and plate aluminum cooler.
Welded stainless steel 1/8" by 1" tabs on the bumper for the front, and radiator support for the back. Welds would have been nicer if I didn't have to stop and splash water because I kept catching my bumper and radiator support on fire. Hahahaha
I originally planned to cut the body panel support, and relocate it, so that I could move the intercooler up and back further. But seeing as how I had to reglue the body back to the support before the paint job, I decided not to fuck with it.
The only thing that had to be moved was one of the horns, and obviously the vacuum tank which is already long gone. It's a tight fit, headlights rest on the edges of the cooler.
No intercooler in this pic, just sex.
Intercooler Install
