Home
Don't have an account? Create one now! It's always free!


Forgot Password
Ed's Auto Parts - Mention MOTORGEN for a Discount!
Motorgen Sponsor: McLeod Racing
Motorgen Sponsor: American Muscle - Add style and performance to your Stang
Motorgen Sponsor: Hall Fabrication & Racing
Motorgen Sponsor: Injectors Plus - Performance Fuel Delivery Systems
Reply
 
Thread Tools
Old 02-25-2015, 03:24 PM   #81
Shaolin CraneShaolin Crane is offline
pain's fun, hit me again
 
Shaolin Crane's Avatar
 
Join Date: Sep 2009
Posts: 6,264
Default

Quote:
Originally Posted by Vettezuki View Post
I get your point, I guess it's relative. I'm beyond OE for sure, but pretty moderate compared to nutters. FTM my LS1 lifters (and rockers) look 100% fine. I'll bring it up again and make sure we're on the same page.

My primary failure was a rod bearing, that's what was making noise and best guess indicates a detonation precipitated the impending failure. Pulling it apart we discovered (so far) a broken ring and a chewed up cam. Previously it was an AM spring that popped. Unless I'm forgetting something, nothing OE in the valve train failed or even looks tired. It's not a lot of money difference, so that's not my concern here, but spending a few hundred dollars extra for nothing more than a little more valve train noise in reality doesn't appeal to me either.
I'll say it again, you're not going to a solid roller, you're staying hydraulic, noise should not increase at all. My injectors are louder than the lifters are, you're having a reputable shop doing the work, so I would expect them to install them with the proper preload and pushrod length.

If a portion of the cam was chewed up, and not the lifters that means the lifter was collapsing at some point and bouncing on the cam or the push rod was flexing. Link bars won't collapse, so no float, etc. Lifter failure is usually for extended consistent RPM, usually doesn't matter at what RPM. 20 seconds at 4k is riskier than 3 seconds at 7k.

I'm all for saving money, but, the valve train is not the place to do it. So either run a cam that will match with the LS7 parts, or run stuff that matches the larger cam.

I'm just offering advice, you can take it how you please.
__________________
Quote:
Originally Posted by Bruce Lee
Forget about winning and losing; forget about pride and pain. Let your opponent graze your skin and you smash into his flesh; let him smash into your flesh and you fracture his bones; let him fracture your bones and you take his life. Do not be concerned with escaping safely — lay your life before him

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Stopping the world!
  Reply With Quote
Old 02-25-2015, 03:27 PM   #82
Shaolin CraneShaolin Crane is offline
pain's fun, hit me again
 
Shaolin Crane's Avatar
 
Join Date: Sep 2009
Posts: 6,264
Default

Quote:
Originally Posted by Vettezuki View Post
This is all I've found. It's not the lifter so much but people just plain configuring their valve train wrong. How many LS7 lifters fail in stock LS7s after even many hard miles? Not many that I'm aware of. The max lift on a stock LS7 is like .590~ and they spin up to 7k.
Those lifters are paired with a measly 100lb valve spring, make sure that is noted. Lifters, are paired to spring pressure, as noted in my earlier post.
__________________
Quote:
Originally Posted by Bruce Lee
Forget about winning and losing; forget about pride and pain. Let your opponent graze your skin and you smash into his flesh; let him smash into your flesh and you fracture his bones; let him fracture your bones and you take his life. Do not be concerned with escaping safely — lay your life before him

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Stopping the world!
  Reply With Quote
Old 02-25-2015, 03:33 PM   #83
RyridesmotoxRyridesmotox is offline
Senior Member
 
Join Date: Nov 2010
Posts: 510
Default

Actually... Plenty. My budget may dictate that I have to run LS7s and that's fine for a while to me, but eventually I'll be going with linked bars, they are better.

It depends more on the lobe design from what I understand. If you have a very aggressive ramp rate. The lifter and pushrod can lose contact with the cam lobe (because spring pressure isn't matched well. Its all about how the valvetrain is designed as a whole.

Edit: As a side note, a few of my buddies that work on vettes bought tons of the older sets of LS7 lifter. Apparently the early lifters are better. The newer ones are more failure prone and are said to be the replacement for all LS lifters. That's just their personal experience.
__________________
The Tow Pig: 2013 Silverado 1500 crew cab

The Race Car lol: 2004 Cadillac CTS-V... With things.

Better to be judged by 12 than to be carried by 6.
  Reply With Quote
Old 02-25-2015, 03:38 PM   #84
Shaolin CraneShaolin Crane is offline
pain's fun, hit me again
 
Shaolin Crane's Avatar
 
Join Date: Sep 2009
Posts: 6,264
Default

Quote:
Originally Posted by Ryridesmotox View Post
Actually... Plenty. My budget may dictate that I have to run LS7s and that's fine for a while to me, but eventually I'll be going with linked bars, they are better.

It depends more on the lobe design from what I understand. If you have a very aggressive ramp rate. The lifter and pushrod can lose contact with the cam lobe. Its all about how the valvetrain is designed as a whole.
Exactly, .550 and up cams have more aggressive ramp rates, more aggressive ramp rates need more spring pressure, run more spring pressure you need a lifter that can handle it, which means you need a pushrod that can handle it.

So either go with LS7 everything. Cam, lifters, pushrods and valve springs, or, use data supplied from cam specs and build accordingly. If you have a lifter failure, you cannot just pop the intake off like with a SBF or SBC.
__________________
Quote:
Originally Posted by Bruce Lee
Forget about winning and losing; forget about pride and pain. Let your opponent graze your skin and you smash into his flesh; let him smash into your flesh and you fracture his bones; let him fracture your bones and you take his life. Do not be concerned with escaping safely — lay your life before him

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Stopping the world!
  Reply With Quote
Old 02-25-2015, 06:26 PM   #85
VettezukiVettezuki is offline
I, Vettezuki
 
Vettezuki's Avatar
 
Join Date: Feb 2006
Posts: 14,754
Default

Ugh. One more day. Kinda getting tired of this aspect of car hobby.
__________________
Motorgen on
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Motorgen on
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Motorgen Project Car
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
(active)
Motorgen Project Car
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
(back burner)
  Reply With Quote
Old 02-25-2015, 06:56 PM   #86
RyridesmotoxRyridesmotox is offline
Senior Member
 
Join Date: Nov 2010
Posts: 510
Default

Quote:
Originally Posted by Vettezuki View Post
Ugh. One more day. Kinda getting tired of this aspect of car hobby.
This too shall pass. I'm still probably 2-3 weeks out. The waiting is the hardest part.
__________________
The Tow Pig: 2013 Silverado 1500 crew cab

The Race Car lol: 2004 Cadillac CTS-V... With things.

Better to be judged by 12 than to be carried by 6.
  Reply With Quote
Old 02-27-2015, 03:08 PM   #87
VettezukiVettezuki is offline
I, Vettezuki
 
Vettezuki's Avatar
 
Join Date: Feb 2006
Posts: 14,754
Default

Block is ok at 3.908, max over.

Thanks Ryder, but won't be needing that L76.

Piecing together the package now. Going to keep stock displacement (mostly to avoid the cascade of costs that follow stroking), but will go with forged rods as well as pistons. Pistons will have a light dish to drop CR to between 10.5 and 11.0, depending on what's available.

Remaining head remains to be seen.
__________________
Motorgen on
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Motorgen on
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Motorgen Project Car
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
(active)
Motorgen Project Car
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
(back burner)
  Reply With Quote
Old 02-27-2015, 03:26 PM   #88
RyridesmotoxRyridesmotox is offline
Senior Member
 
Join Date: Nov 2010
Posts: 510
Default

Cool dude. Keep us posted on the build.
__________________
The Tow Pig: 2013 Silverado 1500 crew cab

The Race Car lol: 2004 Cadillac CTS-V... With things.

Better to be judged by 12 than to be carried by 6.
  Reply With Quote
Old 03-04-2015, 04:24 PM   #89
VettezukiVettezuki is offline
I, Vettezuki
 
Vettezuki's Avatar
 
Join Date: Feb 2006
Posts: 14,754
Default

Coming together. May be able to pick it up next week.

Heads and block checked out so far, which means the little bit of coolant that was in no. 1 is a mystery. Troy said he's seen one case where there was a little leak between the liner and block when the engine heated up. Unfortunately, that's not so easy to check for.

A new cam is being ground for it according to my behavior requirements. Not sure what the final specs are yet though.

Will put in H beam rods along with the forged pistons, so when all is said and done, motor should be good for a dead reliable 600WHP or so, which I have no intention of going to with this motor, so a big margin of safety.

With the -4cc dish and my heads, and stock gasket CR will come in at around 10.7 or roughly a half point drop. Everything should work fine with my tune until I get headers at which point I'll go for a full re-tune. That'll be about it for this motor. Probably come in somewhere around 420-430WHP, on a smoggable street friendly 346ci~ NA motor. Not bad.
__________________
Motorgen on
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Motorgen on
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Motorgen Project Car
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
(active)
Motorgen Project Car
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
(back burner)
  Reply With Quote
Old 03-05-2015, 08:06 AM   #90
94cobra69ss39694cobra69ss396 is offline
Fast & Filthy
 
94cobra69ss396's Avatar
 
Join Date: Jun 2008
Posts: 3,840
Default

Who's doing your cam?
  Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -7. The time now is 06:02 PM.