Motorgen - Automotive Events, Meets, Cruises and Forums - View Single Post - Time For The Cobra To Get A New Engine

94cobra69ss396 · 11-02-2012, 10:22 PM

I picked up my block and cam today (thanks again for picking the cam up Guy!). The new Probe pistons measured 4.026 so the block was finished honed to 4.031 for .005 clearance. Cam specs for my American Custom Cams cam are .555 lift with my 1.7 rockers, 218 at .050 with a 114 LSA. Tomorrow I'm going to start building.

11-02-2012, 10:22 PM	#37
94cobra69ss396 Fast & Filthy Join Date: Jun 2008 Posts: 3,840 Tweet	I picked up my block and cam today (thanks again for picking the cam up Guy!). The new Probe pistons measured 4.026 so the block was finished honed to 4.031 for .005 clearance. Cam specs for my American Custom Cams cam are .555 lift with my 1.7 rockers, 218 at .050 with a 114 LSA. Tomorrow I'm going to start building.