I have three sets of rim for the Cobra. One set are 98 Cobra rims which came on the car when I bought it. They are 8.5x17 front and rear. The second set original Steeda Ultralites which are 9.5x17 front and 10.5x17 rear. The last set are stock SN95 GT rims (2) that I have my M/T slicks mounted to. I used to run the Steeda rims with street tires and had 245/45/17 NT01 mounted on the Cobra rims for the track. That's the tire I had when you and I went to Adam's. However, I'm now running a 255/45/17 on the Cobra rims for the street. I still need to buy some NT01 for the track that will be mounted on the Steeda rims and I'll be going to a 275/40/17 on the front and a 315/35/17 in the rear.
Right now my Camber is set at -2 degrees which I run all the time. I've been told that the car will work best with somewhere between -2.5 - 3.0 but I haven't tried that yet. I do plan on going over to Crest Chevrolet one day with Phil and using their alignment rack to set the camber up at -2.5 and -3 so that I can mark my caster/camber plates so for all three so I can easily change it at the track to test. That way I can change it back to the -2 I run on the street.
|