Quote:
Originally Posted by enkeivette
"The most common problems that occur in the master cylinder is wear in the piston bore and piston seal failure. The classic symptom of a failing master cylinder is a brake pedal that slowly sinks while pressure is held against the pedal. The cure is to replace the master cylinder."
http://www.import-car.com/basic-brak...ster-cylinder/ |
Pretty sure that's what I said.
Quote:
Originally Posted by 94cobra69ss396
When the master cylinder goes bad it bleeds off pressure so the peddle will go to the floor.
|
I've had that happen on a few cars with the Chevelle being one of them.