Got more done today. I finished installing the injectors, upper intake, egr and sensors, and the TB. I also installed the drivers side accessories so I could see how much room I was going to have for the power steering lines and mock up lines to be made. I will only have to have a high pressure line made because I was able to cut and bend the low pressure line. Tomorrow I'll go to The Hose Man and have the line made.
Getting closer.
Here's the mocked up high pressure line. It's the one with the hose clamps on it.
The green arrows point to the low pressure hose and hard line and the yellow arrow points to the high side line that I bent to crap fitting it where I wanted.
