View Single Post
Old 05-15-2011, 08:12 AM   #9
kdracer73kdracer73 is offline
Senior Member
 
kdracer73's Avatar
 
Join Date: Apr 2008
Posts: 1,557
Default

We need to test the voltage getting to the main starter wire and the starter signal/crank wire, when it happens. I had one in the shop that had 7 volts getting to the starter solenoid signal wire at times. We ran a new wire from the ign switch, and that fixed it. Do you have a heat shield on the starter ? Heat is a killer .
__________________
I drive a hybrid, It burns gas and rubber..
Alcohol Tobacco & Firearms should be a convenience store, not a government agency.
  Reply With Quote