Motorgen - Automotive Events, Meets, Cruises and Forums - View Single Post

enkeivette · 03-31-2011, 11:38 AM

I had a similar problem on the Vette. It was causing lazy starting. The connector tips were corroding.

The fix was to cut the connector out and solder the wires directly together. It was just a connection between the engine harness and the firewall. No need for it.

Pretty common fix on C3s.

03-31-2011, 11:38 AM	#3
enkeivette Super Moderator Join Date: Dec 2007 Posts: 6,850 Tweet	I had a similar problem on the Vette. It was causing lazy starting. The connector tips were corroding. The fix was to cut the connector out and solder the wires directly together. It was just a connection between the engine harness and the firewall. No need for it. Pretty common fix on C3s. __________________ I <3 forced induction.