Quote:
Originally Posted by BlacknBoostn
Enkei, thats ridiculous because thats the way these cars are set up. Go check your moms. PCV on the passenger side of valve cover is routed directly to the vacuum nipple on the throttle body. thats the main reason for my catch can between those two points. oil condenses and settles in the lower coldside pipe which is the dumbest idea ever.
|
Dude, that is fing retarded. But I have a solution for you, try this before you get crazy with welding ports on your exhaust for suction: cut the blue arrow hose, install a vacuum T; remove the red arrow hose, and install it into the T on the blue arrow hose; cap off the throttle body vacuum port with a rubber cap.
This is such an easy mod I'm going to be mad if you don't at least try it. Those hoses are so close it's begging for it.
