Motorgen - Automotive Events, Meets, Cruises and Forums - View Single Post

enkeivette · 01-18-2010, 01:17 PM

So I've been lurking E-Bay for about a year looking for a long thin intercooler. I need one that about 10"x30" with 3" inlets. I've found some near that size, but they're always 2 1/2" inlets.

So here's my question, it looks like these things taper down into the 2 1/2 inlets, and the casing itself is 3" thick. So would it be easy to cut one of these and weld on some 3" tubes?

01-18-2010, 01:17 PM	#1
enkeivette Super Moderator Join Date: Dec 2007 Posts: 6,850 Tweet	Intercoolers So I've been lurking E-Bay for about a year looking for a long thin intercooler. I need one that about 10"x30" with 3" inlets. I've found some near that size, but they're always 2 1/2" inlets. So here's my question, it looks like these things taper down into the 2 1/2 inlets, and the casing itself is 3" thick. So would it be easy to cut one of these and weld on some 3" tubes? __________________ I <3 forced induction.