Quote:
Originally Posted by 94cobra69ss396
Ben, do you know how much lift your valve springs can take? How about your piston to valve clearance? I wouldn't go installing a set of 1.8 rockers until you know these measurements. If you’re going to replace the head gaskets with thicker ones then you'll gain some piston to valve clearance over what you have currently but you will still want to clay the piston and make sure.
|
Thanks for the warning. These are comp cam springs, and I *think* they're good for beyond .600 lift, but not positive on the specs.
__________________
Motorgen on To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Motorgen on To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Motorgen Project Car To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. (active)
Motorgen Project Car To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. (back burner)
|