Thread
:
Started Porting the Heads on the Chevelle
View Single Post
03-26-2009, 11:11 PM
#
10
94cobra69ss396
Fast & Filthy
Join Date: Jun 2008
Posts: 3,840
Tweet
Here are some pictures I took tonight before I started working. Since I already did one I took pictures of it and then of one that wasn't done yet. Sorry for the bad pitures but I didn't have very good lighting. As you can see I didn't do much to the intake port besides blend the end of the runner and smooth the short side radius which you can't see all that well. On the combustion chamber I just smoothed it and then unshrouded the sides by both valves. I didn't change the shape at all. The exhaust port is where I spent most of my time. I didn't touch the floor just the roof and walls and I smoothed the short side radius on it too. I also finished the second one tonight so two more to go and then I can pull the other head and start on it.
94cobra69ss396
View Public Profile
Send a private message to 94cobra69ss396
Find More Posts by 94cobra69ss396