Quote:
Originally Posted by 94cobra69ss396
I got the trans cross member done tonight but I hope it will work. Joe, can you tell me if this is how the trans lines up with the shifter hole on your Mustang? I bolted the engine and trans together and set them in the car then tried to line them up using the SBC/T5 cross members as a guide. I set the engine as far back as I could so hopefully it will all work well.
|
I have a T5 in my 65 Mustang and an automatic in the 68. To tell you the truth, I can't remember how the toploader lined up. It was too long ago, but I'm pretty sure it is centered in the tunnel. And actually that hole doesn't appear to be that far off. I think you'd have to open it up a little, but not much. Here's a pic of a shifter for a toploader on a 66 Mustang.