Motorgen - Automotive Events, Meets, Cruises and Forums - View Single Post

enkeivette · 12-25-2008, 10:04 PM

Not what I've been told, but it's not going to hurt anything.

I've been told, epoxy, the surfacer, then glaze & sand, then spot prime & sand, then seal...

I skipped the first step. I didn't see the need for an epoxy base, seeing as how I went to bare SMC & the surfacer that I used is a polyester surfacer.

12-25-2008, 10:04 PM	#25
enkeivette Super Moderator Join Date: Dec 2007 Posts: 6,850 Tweet	Not what I've been told, but it's not going to hurt anything. I've been told, epoxy, the surfacer, then glaze & sand, then spot prime & sand, then seal... I skipped the first step. I didn't see the need for an epoxy base, seeing as how I went to bare SMC & the surfacer that I used is a polyester surfacer. __________________ I <3 forced induction.