Quote:
Originally Posted by 94cobra69ss396
What's the specs on the new cams? What else are you doing to the engine while it's out? Does it already have forged pistons from the factory?
|
so far this is what my engine is getting while its out.
-twin plate clutch of grabbyness
-head studs - so i can finally boost above 30psi
-springs and retainers, so my bigger cams wont tap my pistons and rev to 8000 rpm safetly
-kelford 272 intake/exhaust cams
-3" downpipe finally
-dual fuel pump set up
-ported intake mani
-dunlop z1 star spec 255/40/17 tires
-new passenger fender
-alignment
-cool little shift knob
as for my blown motor its brobably just gonna collect dust in my garage until i sell it or rebuild it, im not sure what i want to do yet.
as for cam specs
my currents cams - hks 272 intake/exhaust
HKS 272
Advertised Duration - 272 deg
Effective Duration - 214 deg @ 1mm
Lift - 10.8mm Int / 10.2mm Exh
Lobe Centerlines - 110 deg Int / 110 deg Exh
LSA - 110 deg
the new cams i bought are kelford 272 in/ex
Kelfrd 272
Advertised Duration - 272 deg
Effective Duration - 226 deg @ 1mm
Lift - 11mm Int / 11mm Exh
Lobe Centerlines - 130 deg Int / 113 deg Exh
LSA - ?? i dont know