View Single Post
Old 12-12-2008, 07:36 AM   #12
st-evo-9*corn fed-8urvet*st-evo-9*corn fed-8urvet* is offline
Senior Member
 
st-evo-9*corn fed-8urvet*'s Avatar
 
Join Date: Jul 2008
Posts: 501
Default

Quote:
Originally Posted by Vettezuki View Post
Is the EvoX Direct Injection?

How the F do you get 22-24psi on a 9:1 motor with 91 or even 93 octane, even if you're intercooling like crazy? The timing must be down to nothing . . .
lol actually if you wanna know something interesting mitsubishi actually put more timing into to the evo10 then the older evo's

here is the evo 9 timing map

*the dots on this map are around what the evo 9 hits with around 20-22psi so plot those dots on the evo10 timing map and look up how much timing advance mitsu put on the evo10 out of the box its insane!* also remember that the evo10 comes with 22psi so the dots should plot to what the evo10 actually does boost wise.



and here is an evo 10 timiing map



also the numbers are a direct relation to timing advance so when it says 9 at 7000prm that means 9 degrees of timing atvance at 7000rpm.
__________________
ask me about my weener!!

**Understeer is when you hit the wall with the front of the car
**Oversteer is when you hit the wall with the rear of the car
**Horsepower is how fast you hit the wall
**Torque is how far you take the wall with you.
  Reply With Quote