Motorgen - Automotive Events, Meets, Cruises and Forums

Motorgen - Automotive Events, Meets, Cruises and Forums (http://www.motorgen.com/forum/index.php)
-   Domestic (http://www.motorgen.com/forum/forumdisplay.php?f=5)
-   -   Fuel Pump Going Out (http://www.motorgen.com/forum/showthread.php?t=38615)

94cobra69ss396 04-21-2012 06:28 PM

Fuel Pump Going Out
 
The fuel pump was going out in the Cobra. So today I dropped the tank to see what part number Walbro was in it. I knew it was a 255 but didn't remember if it was the high pressure version or just the regular pressure one. This is what I found.







No wonder the fuel pump was having such a hard time. GTR didn't have one in stock so I ordered a one and also picked up a new screen.

I also installed a new starter because it was going out too. While replacing the starter I noticed that the elbow on the intake tube had a hole in it. Between that and the fuel pump I'm hoping the issues that I've had recently will be resolved.


2011GT302 04-21-2012 08:51 PM

Better in the screen than in the injectors...

94cobra69ss396 04-21-2012 09:09 PM

The fuel filter would catch any smaller paticals. I'm actually glad it looks bad because it helps explain the issues it's been having.

Damian 04-21-2012 10:16 PM

The intake tube looks like you tried to drill a hole into it.

Shaolin Crane 04-22-2012 02:43 AM

Ahh, that's the wonderful kommiefornia gas.

94cobra69ss396 04-22-2012 11:28 AM

Quote:

Originally Posted by Damian (Post 96056)
The intake tube looks like you tried to drill a hole into it.

I think what happened is that oil inside it heated up and burnt a hole through it. With 90,000 miles on it the engine has a little bit of blowby and it ends up in the intake track. I'm going to buy a new elbow but this time I'm going to try and insulate it.

94cobra69ss396 04-30-2012 02:45 PM

I received the new fuel pump and installed it on Saturday. All I've been waiting for is the new elbow to get here from UPR which arrived today only to be the incorrect one. The one I received is only 2 3/4 to 3 1/4 inch and it was supposed to be 3 to 4 inch. So they are shipping me the correct one tomorrow. Hopefully they will overnight it to me but chances are they'll ship it ground so I won't have it until next week. F*&^!

Vettezuki 04-30-2012 03:56 PM

I'm installing a new fuel reg/filter in the hopes it's the remaining part of my problem. . . After that, it's the pump for me too. .

94cobra69ss396 04-30-2012 04:34 PM

If all I was doing was the pump then the car would have been running last week. I ordered the elbow from UPR on Monday last week. I ordered the fuel pump from Summit on Tuesday. Summit said 4-6 days shipping, UPR said 5-7 days shipping. Fuel pump arrived on Thursday last week and the elbow got here today.

Shaolin Crane 04-30-2012 08:25 PM

I think is poetic that it happened to you days after me, not cause you're karma is horrible, just that UPR is that shitty of a company


All times are GMT -7. The time now is 08:26 AM.

Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.