SBF experts needed
I am putting my 68 GT/CS back together. I had a blown 347 stroker in it, but crashed it and broke the blower. I'm now thinking I'll install a bigger solid roller cam and high compression pistons, an air gap intake, and a 750 CFM carb.
Anyone recommend a good cam? I'll be running 4.11 gears through an AOD with a 3000 stall converter. I have aluminum Dart Pro1 heads (2.02/1.60 valves, 195cc runners), Thorley long tube headers and 2 1/2" magnaflow exhaust with an X pipe. Also, any recommendations on a good piston that'll give me ~11:1 compression with a 62 CC combustion chamber? Any problems I might run into? Piston to valve clearance, maybe? |
Quote:
For a cam I wouldn't go much over 240 duration @ .050 with a 110-112 lobe seperation with a 3000 stall unless you run more compression and race fuel. And with our little SBF exhaust ports I favor the exhaust side. Something along the lines of this Crane cam. Or if you want to stick to a hydraulic roller run something like this Lunati cam. Then use a Performer RPM Air Gap manifold and your 750HP carb. |
All times are GMT -7. The time now is 01:37 AM. |
Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.