Possible Motorgen Project Cars
We've been kicking around ideas for doing project cars for a while. Here are some options in the poll. Let us know your thoughts.
Obviously we're looking for a fun way to promote the site (well duh). The constraints are in this order: 1 cost - No budget set but we're talking a few grand tops, but on top of donations of some parts and time, it should be enough . . . I think. 2 performance - The idea is to have fun and promote the site with something interesting. It doesn't have to be a world beating masterpiece. 3 time - There are no special deadlines. (But deadlines will be set.) One of the ideas is that any members who participate meaningfully with donations of time or parts can drive the car. I have an L83 SBC, and 700R4 that could be used. It's optional for it to be a a street car or track only car. It should have some kind of interesting feature or character. It's good if it can mix up different bits and pieces from different makers, keeping in line with what the site is about. The poll is just some options. If you have some more, let us know. HOW THE PROJECT WOULD KINDA WORK[ I'm a fan of the Tiger Team Model. That is talented people have responsibility for a project or an area of a project depending on the size and complexity. Project subdivision would look something like: Project Manager (Vettezuki, unless one of you would like to take it on) Oversees total project flow between units. Manages budget and scheduling. Is ultimately responsible for final product. Gets no credit upon success. Must commit ritual suicide upon failure. Ok, I'm kidding about the last bit. Engine System Responsible for engine, computer and harness (if it exists), engine cooling, intercooling (if exists), fuel storage and supply. PARTS - Vettezuki - L83 SBC - 94cobra69ss396 - TT V6 (Z Motor)? - joedls - Forged 302 Ford LABOR Driveline Transmission, axle, etc. PARTS - Vettezuki - 700R4 - 94cobra69ss396 - 5 Speed from Z? - joedls - 4 speed toploader LABOR Steering/Suspension Steering, Springs, Shocks, etc. PARTS LABOR Interior/Safety Seat, harness, switchgear, cage (if necessary) PARTS LABOR Paint/Body (I know a guy:)) Uh, Paint and body MATERIALS LABOR General Fabrication msc. bits and pieces that will be required almost no matter what. MATERIALS LABOR If something strikes your fancy, please indicate which area you'd like to work in or what you might be able to contribute by posting a reply to this thread. You are not restricted to one area, but don't over commit yourself. Anybody who contributes a major component, cash donation, or works on one of these teams can drive the car at the track or (if a street car) on our cruises. |
Do you already have a lead on a car? I like the idea of the SBC in the 240sx.
|
Quote:
|
That depends on what year your engine is. Do you still have all the smog euipment for it?
|
I feel the MII is most practical. The others would have way too much front weight. They used to put SBC's in Jags and Healy's. Front weight proved to be too much for the susp, and the weight was way too froward.
My fav is the elec drag car, but you need big $$ and sponsors for that. It's up my alley too, but I do not have the access to stuff I had 10 years ago. |
Quote:
|
Quote:
The electric drag car thing is going to happen at some point. But as you mention, the cost and technical details are in a different category. Probably a better choice for a later project car. |
My dad still has a 3.0 turbo V6 and 5 speed trans out of his 1985 300ZX that I crashed 15 years ago. I could probably get it from him if we would like to put it in something. He still has the computer and wire harness as well. We could turn the boost up on it and Corn Fed could tune it.
|
Quote:
How does the weight compare to an SBC? With CornFed's experience, maybe we could do an E85 conversion too? :huh: |
Quote:
|
All times are GMT -7. The time now is 08:48 AM. |
Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.