Motorgen - Automotive Events, Meets, Cruises and Forums

Motorgen - Automotive Events, Meets, Cruises and Forums (http://www.motorgen.com/forum/index.php)
-   B.S. Lounge (http://www.motorgen.com/forum/forumdisplay.php?f=2)
-   -   Finally got my Turbo SVO Up and RUnning! (http://www.motorgen.com/forum/showthread.php?t=26808)

89StangGuy 04-04-2011 08:43 AM

Finally got my Turbo SVO Up and RUnning!
 
1 Attachment(s)
Just like it reads fellas. Finally got this thing running, registered, and down in California. Wasn't even running, flew up to Washington state Wednesday, working on it for 2 days, drove it all the way down to Socal! Mission accomplished.

Tps was bad, fuel line ruptured, injectors burnt out, power steering hose burst, lots of problems (Fixed Now). But now is running alright. See attatched pic! It's missing the bi wing, and you can't really see the offset hoodscoop in this pic but its an SVO.

Next i have a t3/t4 turbo that needs installing, volvo front mount intercooler, and my new fuel pressure regulator.

kdracer73 04-04-2011 09:10 AM

Nice !!

94cobra69ss396 04-04-2011 09:35 AM

Congrats. Time to take it to the track and see what it runs before you install the new turbo.

89StangGuy 04-04-2011 09:56 AM

Quote:

Originally Posted by 94cobra69ss396 (Post 71669)
Congrats. Time to take it to the track and see what it runs before you install the new turbo.

Thanks KD!

Ron, i still have a few things to do before i think its track ready. Needs a new t stat, theres an oil leak, it needs new bushing all around. I just installed polyeurathane end link bushings and I'm going to do so for the sway bar, and rear end. It's got a way to go before I would feel safe to track it. But it'll get there eventually.

jedhead 04-04-2011 11:49 AM

Cool. I test drove one many years ago when new.

Bob

Shaolin Crane 04-04-2011 04:32 PM

If you want an open place to wrench on it with lots of tools my shop is always open for foxes :)

89StangGuy 04-04-2011 05:35 PM

Quote:

Originally Posted by Shaolin Crane (Post 71701)
If you want an open place to wrench on it with lots of tools my shop is always open for foxes :)

I just mite take you up on the offer. I have a turbo and intercooler that needs to get put in. Just need the piping and bov.

Shaolin Crane 04-04-2011 06:43 PM

Call my buddy Hai he has bov's in stock tell him guy sent you
909 217 1035

89StangGuy 04-04-2011 07:50 PM

Quote:

Originally Posted by Shaolin Crane (Post 71706)
Call my buddy Hai he has bov's in stock tell him guy sent you
909 217 1035

Cool thanks alot guy. I can probably find a cheap bov just gotta find my piping and pick an install dAte! I wanna get everything set before I decide to install everything

Shaolin Crane 04-04-2011 08:52 PM

These are hks units


All times are GMT -7. The time now is 03:31 AM.

Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.