Motorgen - Automotive Events, Meets, Cruises and Forums

Motorgen - Automotive Events, Meets, Cruises and Forums (http://www.motorgen.com/forum/index.php)
-   RX-Snake (Project Car) (http://www.motorgen.com/forum/forumdisplay.php?f=130)
-   -   RX-Snake: Transmission (http://www.motorgen.com/forum/showthread.php?t=1063)

Vettezuki 01-05-2009 05:04 PM

RX-Snake: Transmission
 
joedls, or ayone else:

What are the ratios in the Top Loader:

1st ?
2nd ?
3rd ?
4th 1:1

I have a great spreadsheet for plugging this stuff into so you know what your mph/rpm curves are. I would really like to carefully consider the whole system for optimization, from engine through trans to axle and tire size

joedls 01-05-2009 05:12 PM

Quote:

Originally Posted by Vettezuki (Post 12656)
joedls, or ayone else:

What are the ratios in the Top Loader:

1st ?
2nd ?
3rd ?
4th 1:1

I have a great spreadsheet for plugging this stuff into so you know what your mph/rpm curves are. I would really like to carefully consider the whole system for optimization, from engine through trans to axle and tire size


Depends on whether it's a close ratio or wide ratio. I'm not sure which one yours is.

Wide ratio: 2.78 1.93 1.36 1 2.78 reverse
Close ratio: 2.32 1.69 1.29 1 2.32 reverse

joedls 01-05-2009 05:17 PM

Quote:

Originally Posted by Vettezuki (Post 12656)
joedls, or ayone else:

What are the ratios in the Top Loader:

1st ?
2nd ?
3rd ?
4th 1:1

I have a great spreadsheet for plugging this stuff into so you know what your mph/rpm curves are. I would really like to carefully consider the whole system for optimization, from engine through trans to axle and tire size

Here is a link to help you id the tranny to determine if it is a close or wide ratio: http://www.davidkeetoploaders.com/idchart1.htm

Vettezuki 01-08-2009 12:44 AM

Quote:

Originally Posted by joedls (Post 12658)
Depends on whether it's a close ratio or wide ratio. I'm not sure which one yours is.

Wide ratio: 2.78 1.93 1.36 1 2.78 reverse
Close ratio: 2.32 1.69 1.29 1 2.32 reverse

Here's what the trans mission is identified as:
HEH-P 01526
1964 Mustang 289 wide ratio 25-spline
8/20/64 to 12/30/64

BRUTAL64 01-08-2009 12:01 PM

Quote:

Originally Posted by Vettezuki (Post 12949)
Here's what the trans mission is identified as:
HEH-P 01526
1964 Mustang 289 wide ratio 25-spline
8/20/64 to 12/30/64


I've always prefered Wide rations over Close for the street. Now, on a Drag car the % of drop between gears should be ABOUT 19% per gear ( if my brain is working right ). Now that is what we used in the Seventies.

What is the current diff gear ration on the RX?

The Wide Ratio will be fine in most cases. We can make it work. We can not do better --as far as strenght for a 4 speed-- than that Top Loader.:thumbs_up:

Some poor anal restoration guy is looking for that trans for his 64 Mustang.:smack:

Vettezuki 01-08-2009 12:35 PM

Quote:

Originally Posted by BRUTAL64 (Post 12971)
I've always prefered Wide rations over Close for the street. Now, on a Drag car the % of drop between gears should be ABOUT 19% per gear ( if my brain is working right ). Now that is what we used in the Seventies.

What is the current diff gear ration on the RX?

The Wide Ratio will be fine in most cases. We can make it work. We can not do better --as far as strenght for a 4 speed-- than that Top Loader.:thumbs_up:

Some poor anal restoration guy is looking for that trans for his 64 Mustang.:smack:


Yeah, and he might be willing to pay a stupid price for it. Though I don't know about the 289 model. It's the 427s that go for big bucks.

According to JOe the ratios are:
Wide ratio: 2.78 1.93 1.36 1 2.78 reverse

See the engine thread. I posted a graph of mph:rpm assuming this gear box, 255/60x15 tires and a 3.73 rear end, which I *think* is what's in there now, but I need to check.

joedls 01-08-2009 01:20 PM

Quote:

Originally Posted by Vettezuki (Post 12992)
Yeah, and he might be willing to pay a stupid price for it. Though I don't know about the 289 model. It's the 427s that go for big bucks.

According to JOe the ratios are:
Wide ratio: 2.78 1.93 1.36 1 2.78 reverse

See the engine thread. I posted a graph of mph:rpm assuming this gear box, 255/60x15 tires and a 3.73 rear end, which I *think* is what's in there now, but I need to check.


I was offered $800 for that tranny from a guy that just wanted a toploader. It would be worth more to a guy that is looking for a correct date coded tranny.

BRUTAL64 01-08-2009 02:02 PM

Quote:

Originally Posted by joedls (Post 12996)
I was offered $800 for that tranny from a guy that just wanted a toploader. It would be worth more to a guy that is looking for a correct date coded tranny.

$800.00??????? Damn, you must really LOVE Ben and the boys.:hail:

joedls 01-08-2009 04:16 PM

Quote:

Originally Posted by BRUTAL64 (Post 13011)
$800.00??????? Damn, you must really LOVE Ben and the boys.:hail:


Nah, they're too damn ugly for me. I just wanna drive the car and I couldn't let them put a SBC in that car. :rolling:

BRUTAL64 01-08-2009 04:51 PM

Quote:

Originally Posted by joedls (Post 13033)
Nah, they're too damn ugly for me. I just wanna drive the car and I couldn't let them put a SBC in that car. :rolling:

Works for me. You going to be there Sat at Ricks????


All times are GMT -7. The time now is 11:19 AM.

Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.