What's your next mod?
It's slow around here - we need a pickup post. So, what is the next single mod you have planned for your car?
|
Quote:
|
Service A
..well atleast thats where $400 is going to go :rant: After replenishing my bank account... finally get this 35% tint off and put on limo |
Im thinking of doing a cat back. I want it to sound a little deeper. First I need cash but who doesnt
|
Decided to upgrade the fuel system before I intercool. I actually found a non-piston diaphragm pump by Holley that should support the hp. And if it doesn't I'll return it to Summit. I've done that before.
I'd go electric but then I'd need to upgrade my alt and do a bunch of custom wiring and tubing. My alt is already taxed with the electric fans. |
Quote:
|
After RX-Snake, mine would fall into one of two categories:
- Engine 1.7 Rockers Put in some sodium filled valves I have Cold Stat Headers Injectors Retune OR Gucci Big Brake setup |
Not really mods. Heater core ! Oil pan gasket ! Got the parts, not the time:surrender: Planned mod- quick ratio steering box.
|
Quote:
No need for brakes. I can attest to that.:p |
Install the PCM I have with a performance tune. I would like to upgrade the radiator for the intercooler and put in an extra coolant tank to increase the amount of coolant for the intercooler.
Bob |
After the motor is done then I will probably be in need of an upgraded clutch and a new seat. I will probably take a break for a while after that. When I'm scheduled to return to the "main land" I will be looking for a built car for ST-1 or GT2. If I can't find something in my price range then I will sned my car back early and have it caged and stripped down.
|
Quote:
- New from scratch - Used but in good condition |
Quote:
|
Quote:
SBCs are leak happy. |
First on my list is to build a rear shock hoop on the Explorer so that I can run longer shocks. Right now I have a shock that has 9.25 inches of travel. It has 3 inches of up travel and is bottoming out 5 inches before my bump stop. I need to raise the upper mount and then install longer shocks. It should cycle 14-15inches when I'm done.
For the Cobra I need to do the brakes and figure out an electrical issue that it now has. For the Chevelle I going to install the new windows I bought for it. |
Quote:
A GT-2 car is >$100K unless you can find a deal. You can find some cheaper RX-8s, but you will be continously fighting not to come last. I troll the back pages of Grassroots motorsports magazine and Sportscar Magazine to see what's for sale. I have time.:) |
I think I will put a bass boat paint job and some gold Dayton wheels on my dads FJ40.:rolling:
My Fj40 will get a new fuel tank, longer rear leaf springs and the axle moved back 5 inches. Then 37 inch tires. The Jimmy will be getting new dual exhaust with flow masters to go behind the recently installed 383cid small block. |
Quote:
|
Putting new gears and updating my tune should give me another 50hp
(hopefully):pot_stir: |
Quote:
I'd love to do this though: The sound alone is :drool2: |
Quote:
|
Quote:
|
Quote:
|
Is the Cobra a Mod motor or a 5 . slow?
|
Quote:
|
Quote:
|
Quote:
|
New primer coat........:inout:
|
Quote:
|
Quote:
|
Going to turbo my Eclipse.
|
Man that car sounds absolutely nasty. Just love the sound that comes from these cars, reminds me why I wanted to get one.
Regarding next mod: some new seats :) Quote:
|
Quote:
|
8 point cage.
|
Quote:
How you gonna handle the roof situation? You have to work hard in a C3 to keep the bar from the back to the front from being right next to your head (which is dangerous itself.) |
Quote:
|
Quote:
I had a custom seat mount for my Sparco seat made. It sets about as flush to the floor as possible. I took out the liner portion of the top. I'm just 5'10~ and with a helmet I get reasonable clearance to the top, but not much. It wouldn't really be much to the side. About all you could do is forget that you have T-Tops and remove the latching mechanism (or somehow reorient them) and use chromoly instead of DOM (smaller possible diameter). Then it might be minimally tolerable . . . minimally. |
Quote:
|
Quote:
|
Got a little slow at work, decided to kill time by fabing a air cleaner box to seal my air cleaner to the cowl induction hood...... if it goes well I'll put up pics. If it looks like crap.......:suicide:
|
All times are GMT -7. The time now is 05:53 AM. |
Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.