Motorgen - Automotive Events, Meets, Cruises and Forums
Page 4 of 8 « First < 23 4 56 > Last »
Show 40 post(s) from this thread on one page

Motorgen - Automotive Events, Meets, Cruises and Forums (http://www.motorgen.com/forum/index.php)
-   RX-Snake (Project Car) (http://www.motorgen.com/forum/forumdisplay.php?f=130)
-   -   RX-Snake: Transmission (http://www.motorgen.com/forum/showthread.php?t=1063)

Vettezuki 03-20-2009 02:41 PM
It's official
 
We've concluded an agreement with Hall Fabrication and Racing who will provide us with a Renagate Sequential shifter for Ford Top Loader.

BRUTAL64 03-20-2009 04:11 PM
Quote:
Originally Posted by Vettezuki (Post 18381)
We've concluded an agreement with Hall Fabrication and Racing who will provide us with a Renagate Sequential shifter for Ford Top Loader.
:bigthumbsup:

Vettezuki 04-06-2009 10:32 PM
Renagate shifter received.

Vettezuki 05-31-2009 08:00 PM
Clutch balancing
 
Despite lean times I've manage to rustle up some extra side work.

I know when I bought my McLeodd clutch/flywheel assembly for the Vette it was advertised as "balanced."

Thanks to Joe, we have a clutch w/Pressure plate for the Toploader and it looks in ok condition. We don't have a flywheel. If I go into McLeodd (local) and ask for a balanced steel flywheel to the clutch bits I hand them, are they going to laugh hysterically? I don't see what exactly they would balance . . . unlike an internal rotating assembly.

BRUTAL64 06-01-2009 09:29 AM
Quote:
Originally Posted by Vettezuki (Post 23528)
Despite lean times I've manage to rustle up some extra side work.

I know when I bought my McLeodd clutch/flywheel assembly for the Vette it was advertised as "balanced."

Thanks to Joe, we have a clutch w/Pressure plate for the Toploader and it looks in ok condition. We don't have a flywheel. If I go into McLeodd (local) and ask for a balanced steel flywheel to the clutch bits I hand them, are they going to laugh hysterically? I don't see what exactly they would balance . . . unlike an internal rotating assembly.

If George is still there, talk to him. Great guy. I've been using Mcleod since 78. I ONCE went to another company and that will NEVER happen again. Just go to the back and ask for George.:drink:

joedls 06-02-2009 09:16 PM
Quote:
Originally Posted by Vettezuki (Post 23528)
Despite lean times I've manage to rustle up some extra side work.

I know when I bought my McLeodd clutch/flywheel assembly for the Vette it was advertised as "balanced."

Thanks to Joe, we have a clutch w/Pressure plate for the Toploader and it looks in ok condition. We don't have a flywheel. If I go into McLeodd (local) and ask for a balanced steel flywheel to the clutch bits I hand them, are they going to laugh hysterically? I don't see what exactly they would balance . . . unlike an internal rotating assembly.
Make sure you get a 50 oz flywheel.

big2bird 08-25-2009 05:07 PM
Quote:
Originally Posted by joedls (Post 23729)
Make sure you get a 50 oz flywheel.
SFI approved.:thumbs_up:

Vettezuki 08-25-2009 08:06 PM
Quote:
Originally Posted by big2bird (Post 30406)
SFI approved.:thumbs_up:
We're scheduled to get this one when the dough flow opens up again

http://www.summitracing.com/parts/MCL-463100-50/

Don't know if its SFI approved or not, have to check.

94cobra69ss396 08-25-2009 10:53 PM
Quote:
Originally Posted by Vettezuki (Post 30414)
We're scheduled to get this one when the dough flow opens up again

http://www.summitracing.com/parts/MCL-463100-50/

Don't know if its SFI approved or not, have to check.
It is SFI 1.1 approved.

big2bird 08-27-2009 11:36 AM
Quote:
Originally Posted by 94cobra69ss396 (Post 30424)
It is SFI 1.1 approved.
Excellent. I like my feet.:sm_laughing:


All times are GMT -7. The time now is 02:46 AM.
Page 4 of 8 « First < 23 4 56 > Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.