Kinda of a different level, but I know the F1 guys actually fully preheat and run oil through engine system and trans before firing it up. Apparently the damn thing would seize on startupif they didn't.

I know its lubricating ability wont change because of the weight, only its flow characteristics, as you stated, which would decrease the time it would take for the oil to get up to temp since its going to move faster, or so ive been taught. Especially if you're not driving the car. I know any time i take mine out i let it warm up, but thats me.

No Thermostat it is just a billet plate that diverts oil from the filter to the cooler and then back to the filter. It just serves as a place to tap into the oil system with out having to drill or get a second pump. My oil temps get very high very fast to I'm concerned about the high temp break down more than the start-up. The majority of the wear at startup isn't because the oil isn't up to speed it's because there is no oil pressure at start-up. No oil pressure means no hydraulic wedge to keep from having metal on metal contact. That is why the accusumps are nice. They are just a accumulator large enough to handle small transients and provide pressure for start-ups. My car will be making the transition to race-car so I'm working on the items that will maximize the longevity of the components. So less weight and less heat.