Motorgen - Automotive Events, Meets, Cruises and Forums
Page 2 of 2 < 1 2
Show 40 post(s) from this thread on one page

Motorgen - Automotive Events, Meets, Cruises and Forums (http://www.motorgen.com/forum/index.php)
-   B.S. Lounge (http://www.motorgen.com/forum/forumdisplay.php?f=2)
-   -   F'ing CARB! (http://www.motorgen.com/forum/showthread.php?t=31846)

ZexGX 09-08-2011 04:27 PM
So glad my car only has one more sniffer before it's just Plug 'N Play OBD-II check & visual for year 2000+ engined vehicles. http://www.leginfo.ca.gov/pub/09-10/...introduced.pdf My BAR approved engine swap was from a 2001, so my car follows the smog rules for a 2001 Camaro SS.

Vettezuki 09-08-2011 04:44 PM
Quote:
Originally Posted by 94cobra69ss396 (Post 82647)
I've never had it not pass and I like being legal. There's no need to find a crooked shop when I can pass. I'm just not happy that it is barely passing. I may need to do a cam swap to one with a wider LSA. The E303 has a 110 and I think it would do better with one in the 112-114 range.
I have much stricter requirements on the 2001 LS, but my 114 224/224 is as big as they get before trouble arises.

Vettezuki 09-08-2011 04:48 PM
Quote:
Originally Posted by ZexGX (Post 82658)
So glad my car only has one more sniffer before it's just Plug 'N Play OBD-II check & visual for year 2000+ engined vehicles. http://www.leginfo.ca.gov/pub/09-10/...introduced.pdf My BAR approved engine swap was from a 2001, so my car follows the smog rules for a 2001 Camaro SS.
My BAR approved swap was also from a 2001. What are you referring to?

Shaolin Crane 09-08-2011 09:44 PM
Ron, this may be the cam we're limited to running, seems to be a much better cam as well, im going to have my stock cam reground to these specs (about $70)

http://www.summitracing.com/parts/CCA-35-320-8/

94cobra69ss396 09-09-2011 07:20 AM
There's actually quite a few that I think would do better than the E303. This is the one Steve at Powertrain Dynamics recommended to me when I first bought the Vortech but I already had the E303.

http://www.summitracing.com/parts/CCA-35-514-8/

Shaolin Crane 09-09-2011 08:09 AM
Thats basically the same cam, except it has too much duration, 220 or less is needed

Leedom 09-09-2011 11:02 PM
Quote:
Originally Posted by 94cobra69ss396 (Post 82640)
I hate CARB!
:iagree:

enkeivette 09-09-2011 11:22 PM
Someone should make some cheap stamped steel, pinion, under ratio rockers, just for passing smog. People would buy them.

Vettezuki 09-10-2011 12:33 AM
Quote:
Originally Posted by enkeivette (Post 82742)
Someone should make some cheap stamped steel, pinion, under ratio rockers, just for passing smog. People would buy them.
Sounds like an excellent black market product. But that would be wrong. . .

Shaolin Crane 09-10-2011 12:41 AM
I dont think killing lift would do much for smog when duration and overlap is what makes them dirty, annyhow procomp makes such a thing you talk about, irrc the stamped steel roller tip rockers are about $35


All times are GMT -7. The time now is 06:24 PM.
Page 2 of 2 < 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.