PDA

View Full Version : Speed Ventures at The Roval


94cobra69ss396
01-11-2016, 01:16 PM
Speed Ventures is running at California Speedway this weekend 1/16-17. I signed up for Sunday the 17 to see if I can beat my previous best time. If I remember it was a 2:02 or 2:01. I'm pretty sure I can beat that since I only had front brakes at the time and didn't know it. Let me know if anyone one want to come out. I think Guy is going to come with me and ride along as well as help me play with camber settings.

Vettezuki
01-11-2016, 01:50 PM
:popcorn:

Shaolin Crane
01-11-2016, 08:28 PM
As of now I don't see why I can't make it, just need to dig my helmet out.

Vettezuki
01-11-2016, 09:26 PM
You can borrow mine if you can't find it.

94cobra69ss396
01-11-2016, 09:43 PM
I have an extra helmet and extra fire jacket that I will have with me. In fact it's already in the car. I hope you can come. I clearance and marked my CC plates so I can set the camber back to -2 after we're done running for the day.

2011GT302
01-12-2016, 01:55 AM
Ron,
Do they charge to watch and if so how much? I'm not ready to run just yet.
let me know.

94cobra69ss396
01-12-2016, 07:39 AM
There's a $10 gate fee if I remember correctly.

Vettezuki
01-12-2016, 05:01 PM
You guys have a pyrometer to measure tire temps?

94cobra69ss396
01-12-2016, 06:11 PM
I verified there is a $10 gate fee. I do have a digit temp gauge to check the tire temps.

Vettezuki
01-12-2016, 06:24 PM
Wonder what it costs to get your tires filled with nitrogen these days.

94cobra69ss396
01-12-2016, 08:51 PM
I'm not that serious that I would spend the money to fill my tires with nitrogen. Hell, I'm still running too soft rear springs with shocks off of an Expedition from the wrecking yard. They were even coil overs that I pulled the coils off of.

Shaolin Crane
01-13-2016, 12:25 AM
I have a set of race craft springs here at the shop that would probably work pretty well with the torque arm.

94cobra69ss396
01-13-2016, 07:28 AM
Do you know what rate they are? The MM Road &Track rears I have now are 280.

94cobra69ss396
01-17-2016, 06:34 PM
So to stay with my I'm cheap theme I bought a pair of front springs off a Ford Ranger for $35 at Pick-a-Part and modified them to work on the rear of the Cobra. They seem to work fairly well.

Sorry we I don't have any video from today's fun well Guy actually has one lap that he took with his phone and got us black flagged but I did beat my previous best. In fact I went faster each time out. My fastest in the first session was a 1:59.750 which was the third fastest for the group. We ended up not running in the second session because my oil dip stick blew out. In the third session I ran 1:57.9?? which was the fastest for the session so I got to start the fourth in the pole position. Guy didn't run with me in the fourth session so I was a couple hundred pounds lighter and ran my new best of 1:54.936 which again was the fastest for the group.

Leedom
01-17-2016, 07:32 PM
So to stay with my I'm cheap theme I bought a pair of front springs off a Ford Ranger for $35 at Pick-a-Part and modified them to work on the rear of the Cobra. They seem to work fairly well.

Sorry we I don't have any video from today's fun well Guy actually has one lap that he took with his phone and got us black flagged but I did beat my previous best. In fact I went faster each time out. My fastest in the first session was a 1:59.750 which was the third fastest for the group. We ended up not running in the second session because my oil dip stick blew out. In the third session I ran 1:57.9?? which was the fastest for the session so I got to start the fourth in the pole position. Guy didn't run with me in the fourth session so I was a couple hundred pounds lighter and ran my new best of 1:54.936 which again was the fastest for the group.

:bigthumbsup::bigthumbsup:Nice!

Shaolin Crane
01-18-2016, 12:27 AM
Yeah god forbid I hold up a phone.

Vettezuki
01-18-2016, 02:31 PM
So to stay with my I'm cheap theme I bought a pair of front springs off a Ford Ranger for $35 at Pick-a-Part and modified them to work on the rear of the Cobra. They seem to work fairly well.

Sorry we I don't have any video from today's fun well Guy actually has one lap that he took with his phone and got us black flagged but I did beat my previous best. In fact I went faster each time out. My fastest in the first session was a 1:59.750 which was the third fastest for the group. We ended up not running in the second session because my oil dip stick blew out. In the third session I ran 1:57.9?? which was the fastest for the session so I got to start the fourth in the pole position. Guy didn't run with me in the fourth session so I was a couple hundred pounds lighter and ran my new best of 1:54.936 which again was the fastest for the group.


Feel like you have any more time to shave with your current setup?

Shaolin Crane
01-18-2016, 10:35 PM
Feel like you have any more time to shave with your current setup?
I'd be willing to bet with brake tweaking, and some sway bar play he could cut up to 3 seconds off. The brake system is hardly ideal.

94cobra69ss396
01-18-2016, 10:37 PM
Yes, I can still improve. The car still pushes a little so I think it could use a little more camber. Plus there are a couple of sections I can still improve my line and my braking on. But even with that I don't think it has more than half a second. One second at the most. If I remember correctly Carlos was running around a 1:54 in his Vette when he was running his R888 tires which are equivalent to the NT01 I'm running.

94cobra69ss396
01-18-2016, 10:40 PM
I'd be willing to bet with brake tweaking, and some sway bar play he could cut up to 3 seconds off. The brake system is hardly ideal.

A brake change would be a big expense. I could try a bigger sway bar in the rear. I still have the factory Cobra sway bars front and rear and if I remember correctly the Cobra used a stiffer front bar and softer rear bar than the GT did but I could be wrong.

Shaolin Crane
01-18-2016, 11:23 PM
A brake change would be a big expense. I could try a bigger sway bar in the rear. I still have the factory Cobra sway bars front and rear and if I remember correctly the Cobra used a stiffer front bar and softer rear bar than the GT did but I could be wrong.

I meant better pads, rotors that aren't worn and rebuilding the calipers. I think up to three is possible, if you drove it without care of wrecking it.

If you could keep your entry speed up without fear of the brakes fading, I think there's a big improvement capable. I mean we did almost hit 150 that open run before backing off. With offset camber and no passenger you could probably hold 125-127 through the bend.

94cobra69ss396
01-18-2016, 11:34 PM
With just me I did hit 150 and held 125. It actually accelerated coming out of turn 2 in 6th as well and hit 130 before I had to brake. I think that is another spot I can improve a little but I would only do it if I was running straight VP110. Instead of shifting early to 6th I could leave it in 5th so it would accelerate quicker out of turn 2. Then again I would need better braking because I was braking just in time to make a good entry in turn 3.

Vettezuki
01-19-2016, 04:55 PM
Yes, I can still improve. The car still pushes a little so I think it could use a little more camber. Plus there are a couple of sections I can still improve my line and my braking on. But even with that I don't think it has more than half a second. One second at the most. If I remember correctly Carlos was running around a 1:54 in his Vette when he was running his R888 tires which are equivalent to the NT01 I'm running.

I was curious so I asked. Carlos says congrats. His best was 1:49.9 on Hoosiers with 530 WHP and 3,447 race weight including him.

94cobra69ss396
01-19-2016, 05:33 PM
I was curious so I asked. Carlos says congrats. His best was 1:49.9 on Hoosiers with 530 WHP and 3,447 race weight including him.

I knew he ran a 1:49 on the slicks but what was his best on the R888? My car is 500rwhp and 3700lbs with me in it. I'm also running 275/40/17 NT01 front and rear and if I remember he had 295 front and 315 rear tires. I'm also running stock brakes with Raybestos ST47 pads. With all his talking about his superior driving and I'd like to know where I compare to his Vette with the equivalent tire on it.

Vettezuki
01-19-2016, 06:38 PM
Consistently 1:51-1:52 when fresh. The difference is how they fall off over laps, not so much when fresh.

94cobra69ss396
01-19-2016, 09:38 PM
Are you sure about that? I found a video on his YouTube account and then looked up the times on Speed Ventures and his fastest time was a 1:55.548.

http://www.speedventures.com/results/Default.aspx?id=-2146921065

BADDASSC6
01-20-2016, 07:52 AM
Well it's been a long time since I've been here. I'm glad to see you making it ou to the track Ron. Those are great times for any car. I'm glad you took the time to find my old lap time for the Roval. Looks like your more interested in them than I am. Lol. It is a nice trip down memory lane. Regardless here is the link to the very next day after the day you shared. That day I ran a 1:52.7. I sure if you dig harder in the NASAproracing results there will be some low 1:52 and one of two high 1:51. As far as the 1:55.xxx on day one goes. I don't really remember what happened that day. I was making a ton of suspension changes trying to find time.

I wish you continued luck at the Roval. I'm out.

http://www.speedventures.com/results/Default.aspx?id=-2146921065

94cobra69ss396
01-20-2016, 08:13 AM
I wanted them to compare. I know our cars are not equalivent but I was hoping that with the R888 they would be closer than with the Hoosiers so I could see how my times were. There were a bunch of Mustangs with me in my group and some were comparable to mine but the closest one to my time was 5 seconds slower. The next was Ricardo with a 2:02. The car that I was battling with all day was a C5 Z06 and his best was a 1:56 but I don't know what he had done to it. Your car I at least know what's done.