Parts for sale:

[Damian]

Evo 8 Brembos, front and rear. The fronts come with 2 sets of pads, one set is brand new HPS pads, other set for front and rear looks like stock pads (50% left), rears needs brake pad hardware. $500.
http://i53.photobucket.com/albums/g45/meclipsegt/DSC00068.jpg

I also have a T04B H3 turbo ($400) and a GTP-42R turbo ($500) HBC manual boost controller ($40)
http://i53.photobucket.com/albums/g45/meclipsegt/DSC00069.jpg

Will ship for a little extra if needed.

[Vettezuki]

Either of those appropriate for quick spooling boost up to say 15psi on a VG30ET? (I know slightly more than nothing about turbos.)

[Damian]

The T04B would. The compressor can flow enough for around 400-450hp. I was going to put it on the Typhoon but they dont make an adapter plate for me to go from a T3 to T4 with an external wastegate integrated into it like they do for T3 to T3. The GTP-42R is quite large, 1.0A/R exhaust housing and a 1.1A/R compresser housing.

Both turbos have an exhaust intlet that is divided.

[Vettezuki]

The T04B would. The compressor can flow enough for around 400-450hp. I was going to put it on the Typhoon but they dont make an adapter plate for me to go from a T3 to T4 with an external wastegate integrated into it like they do for T3 to T3.

Sounds like we'd have the same problem. Stock is T3. People use the T3/04E, which I guess is a T3 with T4 guts or something like that.

[Damian]

Thats a T3 ehaust housing/wheel with a T4 compressor housing/wheel. The T3 and T4 use the same exact bearing housings. Are you looking for an internal or external wastegate? Depending on the setup, they do sell adapter plates that go from T3 to T4, just not the way my picky ass wanted them. This is one (http://www.ebay.com/itm/T3-divided-Countersunk-Thru-Hole-T4-divided-turbo-flange-adapter-TO4E-/130586565136?pt=Motors_Car_Truck_Parts_Accessories&vxp=mtr&hash=item1e6790da10)you could possibly use. Here is one (http://www.ebay.com/itm/OBX-T3-T4-STEEL-TRANSITION-COUNTOURED-FLANGE-ADAPTER-/150719280133?pt=Motors_Car_Truck_Parts_Accessories&vxp=mtr&hash=item231791b405)that isnt divided, could still work if you really wanted to use this turbo.

I was wanting one like this (http://www.ebay.com/itm/T3-T3-ADAPTER-CAST-EXTEND-FLANGE-35-38MM-WASTEGATE-/320812841909?hash=item4ab1ef7bb5&item=320812841909&pt=Motors_Car_Truck_Parts_Accessories&vxp=mtr), but the divided housing makes it kinda hard.

[Damian]

Youre not that far from me at all, I can always bring it by and you can take a look at it.

[Damian]

Sounds like we'd have the same problem. Stock is T3. People use the T3/04E, which I guess is a T3 with T4 guts or something like that.

Why don't you just upgrade the compressor housing and wheel? You can just go on eBay and buy the parts needed to do it. You just need the T04E compressor wheel, back plate and compressor housing. That's what I did with my GNX turbo. Get a rebuild kit for it at the same time.

Also, accepting reasonable offers, especially if I don't have to ship. If someone here finds someone to pay the prices I'm asking for, I'll pay you a "finders fee".

[Damian]

Need these out of my garage!!

[Damian]

I now have a water cooled bearing housing for the T4 now, will be installing it here real soon.

[Vettezuki]

Why don't you just upgrade the compressor housing and wheel? You can just go on eBay and buy the parts needed to do it. You just need the T04E compressor wheel, back plate and compressor housing. That's what I did with my GNX turbo. Get a rebuild kit for it at the same time. . .

Who would be recommended for doing this kind of labor?

[Shaolin Crane]

Yourself, its pretty simple. I can walk you through a turbo rebuild. Pretty sure I have some spare turbos i blew up left over.

[Damian]

It's not as hard as you think, you just have to know how the snap rings go in and what order the seals/bearings go in. If your buddy buys the T4 for a reasonable price, I'll swap everything over for him for nothing extra. New TO4B compressor housing and new water/oil bearing housing.

[Damian]

Any offers?

[Shaolin Crane]

Belly button lint?

[Vettezuki]

I'll talk to my brother next week. But the market for anything like a "toy" (not a necessity), especially after the Holidays is extremely soft at best.

[Damian]

Belly button lint?

Any pics??:smack:

Just let me know Vette, I have a water cooled bearing housing thats slightly used, only like 500 miles. I just need a set of snap ring pliers that are smal anough to get the snap rings out. I cant find any, might have to order one.

[Vettezuki]

Any pics??:smack:

Just let me know Vette, I have a water cooled bearing housing thats slightly used, only like 500 miles. I just need a set of snap ring pliers that are smal anough to get the snap rings out. I cant find any, might have to order one.

If you need them for whatever I have a set of snap ring pliers down to pretty small and you live pretty close I think.

[Damian]

Thanks, Ill have to get them from you here soon. I just live over by the train station, off off Raymond by the other Nick's Burgers.

[Damian]

If you need them for whatever I have a set of snap ring pliers down to pretty small and you live pretty close I think.

Check your pm's.

[Vettezuki]

Check your pm's.

You can also PM me with your address and I can just drop them off so we don't have to worry about a rendevouz.

[Damian]

I dont have the GTP-42R anymore, traded it. The Brembos will be unavailable for awhile. The T4, Ill take $300 for it.

[Damian]

You can also PM me with your address and I can just drop them off so we don't have to worry about a rendevouz.

Does your brother still want that T4? I'll take $300 for it.

[Vettezuki]

Does your brother still want that T4? I'll take $300 for it.

I'll ask him again. Yes he wants it but is digging himself out of a hole right now.

[Damian]

That's fine. I'm going to sell my other T3/T4 that I was going to use on the Typhoon since I probably won't use it anyways. I'll put it up later with pics.