Does anyone have a hand operated or electric oil pump?

[enkeivette]

I need to do an oil change on my Berekeley Jet Pump tomorrow. It has two oil fittings on the top of the bowl, one on either side, they look like 1/4" fittings. 90 weight gear oil needs to be pumped into one side and it oozes out the other.

I have a little hand held suction pump, but it's not big enough to do a full quart or multiple quarts. It's just a one shot pump. Need something bigger and better.

[Shaolin Crane]

I'm a fuel meter tech, we got all sorts of pumps, i can look around the shop tomorrow and see what i have that will work

[94cobra69ss396]

I have a little hand held suction pump.

Is that what you're calling Sean now?

[enkeivette]

I'm a fuel meter tech, we got all sorts of pumps, i can look around the shop tomorrow and see what i have that will work

Sweet, thanks! It's a 1/8 fitting, I was wrong.

[enkeivette]

Is that what you're calling Sean now?

You sob. Haha. I got excited when I saw you reply, cuz I thought, oh sweet, Ron has everything.

[Shaolin Crane]

Sweet, thanks! It's a 1/8 fitting, I was wrong.

alright lemme look

[SeanPlunk]

Is that what you're calling Sean now?

While I could do an adequate job, Heypal is the real pro :sm_up_there:

[joedls]

Just get a small Hudson sprayer and cut the sprayer off. Then put the fitting you want on the end of the hose with a hose clamp. That should work.

This guy put a valve and a filter in it, but you get the idea.

http://s197forum.com/forum/showpost.php?p=541019&postcount=272