Videos from RET Dyno Day,February 21, 2009

[Vettezuki]

0) Greg Red Turbo Cobra
http://motorgen.com/pic/data/803/medium/RET_022109_01_Test.jpg (http://www.motorgen.com//vid/showphoto.php/photo/791)

1) Cobra_Matt 2003 Black Cobra (http://www.motorgen.com//vid/showphoto.php/photo/797)
http://www.motorgen.com/pic/data/803/medium/RET_022109_02_Test.jpg

2) blumnday99 2003 Built & Blown Mach 1 (http://www.motorgen.com//vid/showphoto.php/photo/800)
http://www.motorgen.com/pic/data/803/medium/RET_022109_03_Test.jpg

3) BlackLandShark 2005 Silverado SS (http://www.motorgen.com//vid/showphoto.php/photo/801)
http://www.motorgen.com/pic/data/803/medium/RET_022109_04_SilveradoSS.jpg

4) SeanPlunk 2004 Cobra 454rwhp/462rwtq (http://www.motorgen.com/vid/showphoto.php/photo/802)
http://www.motorgen.com/pic/data/803/medium/RET_022109_05_Sean_sCobra.jpg

5) G-pa's 2007 BMW 335i Sedan (http://www.motorgen.com/vid/showphoto.php/photo/803)
http://www.motorgen.com/pic/data/803/medium/RET_022109_06_Grandpa_s135i.jpg

6) ULOSE Dark Blue SRT4 (http://www.motorgen.com/vid/showphoto.php/photo/804)
http://www.motorgen.com/pic/data/803/medium/RET_022109_07_SRT4.jpg

7) Deep-GXP Pontiac Solstice GXP (http://www.motorgen.com//vid/showphoto.php/photo/805)
http://www.motorgen.com/pic/data/803/medium/RET_022109_08_Solstice.jpg

8) n2osage 2003 Twin-Turbo Chevrolet Corvette (http://www.motorgen.com//vid/showphoto.php/photo/806)
http://www.motorgen.com/pic/data/803/medium/RET_022109_09_Vette.jpg

9) Asrtive Dodge Charger SRT8 (http://www.motorgen.com//vid/showphoto.php/photo/807)
http://www.motorgen.com/pic/data/803/medium/RET_022109_10_SRT8.jpg

Motorgen - Videos - RET_022109_11_SRT8@@AMEPARAM@@value="file=/vid/data/527/RET_022109_11_SRT8.flv&@@AMEPARAM@@527@@AMEPARAM@@RET_022109_11_SRT8.flv
http://www.motorgen.com/pic/data/803/medium/RET_022109_11_SRT8.jpg

Motorgen - Videos - RET Dyno Day Feb. 21, 2009 - SRT8@@AMEPARAM@@value="file=/vid/data/527/RET_022109_12_SRT8.flv&@@AMEPARAM@@527@@AMEPARAM@@RET_022109_12_SRT8.flv
http://www.motorgen.com/pic/data/803/medium/RET_022109_12_SRT8.jpg

Motorgen - Videos - RET_022109_13_CobraVert@@AMEPARAM@@value="file=/vid/data/527/RET_022109_13_CobraVert.flv&@@AMEPARAM@@527@@AMEPARAM@@RET_022109_13_CobraVert .flv
http://www.motorgen.com/pic/data/803/medium/RET_022109_13_CobraVert.jpg

Motorgen - Videos - RET Dyno Day Feb. 21, 2009 - Merc@@AMEPARAM@@value="file=/vid/data/527/RET_022109_14_Merc.flv&@@AMEPARAM@@527@@AMEPARAM@@RET_022109_14_Merc.flv
http://www.motorgen.com/pic/data/803/medium/RET_022109_14_Merc.jpg

Motorgen - Videos - RET Dyno Day Feb. 21, 2009 - Mazda Speed3@@AMEPARAM@@value="file=/vid/data/527/RET_022109_16_GTi.flv&@@AMEPARAM@@527@@AMEPARAM@@RET_022109_16_GTi.flv
http://www.motorgen.com/pic/data/803/medium/RET_022109_16_GTi.jpg

Motorgen - Videos - RET Dyno Day Feb. 21, 2009 - Turbo Mustang@@AMEPARAM@@value="file=/vid/data/527/RET_022109_17_TurboMustang.flv&@@AMEPARAM@@527@@AMEPARAM@@RET_022109_17_TurboMust ang.flv
http://www.motorgen.com/pic/data/803/medium/RET_022109_17_TurboMustang.jpg

Motorgen - Videos - RET Dyno Day Feb. 21, 2009 - Solstice@@AMEPARAM@@value="file=/vid/data/527/RET_022109_18_Solstice.flv&@@AMEPARAM@@527@@AMEPARAM@@RET_022109_18_Solstice. flv
http://www.motorgen.com/pic/data/803/medium/RET_022109_18_Solstice.jpg

Motorgen - Videos - RET Dyno Day Feb. 21, 2009 - Z28@@AMEPARAM@@value="file=/vid/data/527/RET_022109_15_Z28.flv&@@AMEPARAM@@527@@AMEPARAM@@RET_022109_15_Z28.flv
http://www.motorgen.com/pic/data/803/medium/RET_022109_15_Z28.jpg

18) compsystems 03 Lightning w/home ported blower, exhaust, 10psi (http://www.motorgen.com/vid/showphoto.php/photo/822/cat/527)
http://www.motorgen.com/pic/data/803/medium/RET_022109_23_Lightning.jpg

[Vettezuki]

19) Grand National w/646rwhp High Dyno for the day (http://www.motorgen.com/vid/showphoto.php/photo/821/cat/527)
http://www.motorgen.com/pic/data/803/medium/RET_022109_24_TB.jpg

20) unknown's 98 Camaro Z28 (http://www.motorgen.com/vid/showphoto.php/photo/820/cat/527)
http://www.motorgen.com/pic/data/803/medium/RET_022109_19_Firebird.jpg

21) Ian's 03 Torch Red Cobra (http://www.motorgen.com/vid/showphoto.php/photo/819/cat/527)
http://www.motorgen.com/pic/data/803/medium/RET_022109_21_RedCobra.jpg

22) slow ride 02 Jim's 02 Camaro SS (http://www.motorgen.com/vid/showphoto.php/photo/818/cat/527)
http://www.motorgen.com/pic/data/803/medium/RET_022109_20_Firebird.jpg

23) Ian's friend's Turbo GTI (http://www.motorgen.com/vid/showphoto.php/photo/817/cat/527)
http://www.motorgen.com/pic/data/803/medium/RET_022109_22_GTi.jpg

24) CRZYCUBAN2 SRT4 Caliber (http://www.motorgen.com/vid/showphoto.php/photo/823/cat/527)
http://www.motorgen.com/pic/data/803/medium/RET_022109_25_Caliber.jpg

25) Singha BMW 335i with Juice Box tune (http://www.motorgen.com/vid/showphoto.php/photo/824/cat/527)
http://www.motorgen.com/pic/data/803/medium/RET_022109_26_335i.jpg

26) Black Mustang Cobra (http://www.motorgen.com/vid/showphoto.php/photo/825/cat/527)
http://www.motorgen.com/pic/data/803/medium/RET_022109_27_Cobra.jpg

27) Ford Bronco w/Nitrous Over 600whp (http://www.motorgen.com/vid/showphoto.php/photo/826/cat/527)
http://www.motorgen.com/pic/data/803/medium/RET_022109_28_Bronco.jpg

28) Black Cobra Aborted Dyno Run (http://www.motorgen.com/vid/showphoto.php/photo/827/cat/527)
http://www.motorgen.com/pic/data/803/medium/RET_022109_29_Cobra.jpg

Motorgen - Videos - RET Dyno Day Feb. 21, 2009 - Cobra@@AMEPARAM@@value="file=/vid/data/527/RET_022109_30_WhiteCobra.flv&@@AMEPARAM@@527@@AMEPARAM@@RET_022109_30_WhiteCobr a.flv
http://www.motorgen.com/pic/data/803/medium/RET_022109_31_WhiteCobra.jpg

Motorgen - Videos - RET Dyno Day Feb. 21, 2009 - GTO@@AMEPARAM@@value="file=/vid/data/527/RET_022109_30_GTO.flv&@@AMEPARAM@@527@@AMEPARAM@@RET_022109_30_GTO.flv
http://www.motorgen.com/pic/data/803/medium/RET_022109_30_GTO.jpg

31) Red 03 Mach 1 (http://www.motorgen.com/vid/showphoto.php/photo/830)
http://www.motorgen.com/pic/data/803/medium/RET_022109_32_RedGT.jpg

32) Sonic03SVT 03 Cobra intake/exhaust (http://www.motorgen.com/vid/showphoto.php/photo/831)
http://www.motorgen.com/pic/data/803/medium/RET_022109_33_BlurCobra.jpg

33) REKKO 09 Infiniti G37 Sedan baseline (http://www.motorgen.com/vid/showphoto.php/photo/832)
http://www.motorgen.com/pic/data/803/medium/RET_022109_34_Lexus.jpg

Motorgen - Videos - RET Dyno Day Feb. 21, 2009 - TB@@AMEPARAM@@value="file=/vid/data/527/RET_022109_38_TB.flv&@@AMEPARAM@@527@@AMEPARAM@@RET_022109_38_TB.flv
http://www.motorgen.com/pic/data/803/medium/RET_022109_38_TB.jpg

Motorgen - Videos - RET Dyno Day Feb. 21, 2009 - F-Body@@AMEPARAM@@value="file=/vid/data/527/RET_022109_35_BlackFBody.flv&@@AMEPARAM@@527@@AMEPARAM@@RET_022109_35_BlackFBod y.flv
http://www.motorgen.com/pic/data/803/medium/RET_022109_35_BlackFBody.jpg

Motorgen - Videos - RET Dyno Day Feb. 21, 2009 - F-Body@@AMEPARAM@@value="file=/vid/data/527/RET_022109_37_FBody.flv&@@AMEPARAM@@527@@AMEPARAM@@RET_022109_37_FBody.flv
http://www.motorgen.com/pic/data/803/medium/RET_022109_37_FBody.jpg

Motorgen - Videos - RET Dyno Day Feb. 21, 2009 - 5.0@@AMEPARAM@@value="file=/vid/data/527/RET_022109_36_White5_0.flv&@@AMEPARAM@@527@@AMEPARAM@@RET_022109_36_White5_0. flv
http://www.motorgen.com/pic/data/803/medium/RET_022109_36_White5_0.jpg

[Deep-GXP]

Thanks for getting all your car buddies to come and join the site. What? You haven't done that yet. Uh oh, I may have misplaced your video. . .


:smack::smack:


LOLOLOLOL :drink:

[Vettezuki]

A recent update to the server indirectly caused a problem that makes it impossible to process thumbnails from uploaded videos, which kacks the upload process. We're working on it.

[Vettezuki]

A recent update to the server indirectly caused a problem that makes it impossible to process thumbnails from uploaded videos, which kacks the upload process. We're working on it.

Fixed. See first test video.

[Deep-GXP]

Fixed. See first test video.


Heck yeah, looks damn good. :)

If i may request....maybe i can get the 08 Blue GXP vid? ;) ;)


I love how it has the air/fuel on the vid !!!!

[SeanPlunk]

Heck yeah, looks damn good. :)

If i may request....maybe i can get the 08 Blue GXP vid? ;) ;)


I love how it has the air/fuel on the vid !!!!

Only Greg's has the a/f ratio. He had the wideband hooked up on that one. For the rest of the participants it won't be.

[Vettezuki]

Heck yeah, looks damn good. :)

If i may request....maybe i can get the 08 Blue GXP vid? ;) ;)


I love how it has the air/fuel on the vid !!!!

You'll get yours in due course. Or maybe you won't, haven't decided yet . . .

:smack:

[Deep-GXP]

hahahha

aww boo i got excited about the a/f.


oh well...next time i get dyno'd i'll make damn sure that they'll monitor a/f

[SeanPlunk]

hahahha

aww boo i got excited about the a/f.


oh well...next time i get dyno'd i'll make damn sure that they'll monitor a/f

Remind me again please what your numbers were? I can't remember if I saw yours or not?

[Deep-GXP]

Yeah i showed you but i know you were busy trying to be in 34325234 places at once.


best runs were 237hp/300tq

I'm loving the torque but i wonder why my hp are much lower.


My tuner is sending me updates via email (with hp tuners). Hopefully we can get a little more out of it :)

Next mod may be a hi-flow cat...which should give me some decent gains.

[SeanPlunk]

Yeah i showed you but i know you were busy trying to be in 34325234 places at once.


best runs were 237hp/300tq

I'm loving the torque but i wonder why my hp are much lower.


My tuner is sending me updates via email (with hp tuners). Hopefully we can get a little more out of it :)

Next mod may be a hi-flow cat...which should give me some decent gains.

Yeah, the torque is great but the hp does seem low. How much boost are you running compared to the LNF tune?

[Vettezuki]

Yeah i showed you but i know you were busy trying to be in 34325234 places at once.


best runs were 237hp/300tq

I'm loving the torque but i wonder why my hp are much lower.


My tuner is sending me updates via email (with hp tuners). Hopefully we can get a little more out of it :)

Next mod may be a hi-flow cat...which should give me some decent gains.

What revs for peak torque and hp?

[Deep-GXP]

Yeah, the torque is great but the hp does seem low. How much boost are you running compared to the LNF tune?

About the same...well actually my tuner made me adjust something and now my Psi shoots straight up to 25psi and holds it for about 1 - 1.5 seconds before going down to about 20-21 and maintains it throughout.

Stock, i was getting 14-17 psi....and it would take much longer to reach it. With my Westers tune it goes straight up to 25psi in each gear before leveling down


The GMPP Sensor upgrade i believe brings it up to 23psi peaks with 20-22 consistant.

[Deep-GXP]

What revs for peak torque and hp?


I hope this image is fine. I didnt want to make it too big. If you want it as big as possible, just ask :)

http://img255.imageshack.us/img255/931/carloswestersracetune2dh.jpg

[Vettezuki]

I hope this image is fine. I didnt want to make it too big. If you want it as big as possible, just ask :)

That just shows speed, do you know your axle and tire size? I'm guessing that initial bump is the over boost period, but there seems to be quite a fall off in torque as the revs clime. You really want a dyno with both A/F AND Boost to have a better idea of what's really going on. It seems to me like something is getting choked out and you might have quite a bit of power left on the table :huh:

[Deep-GXP]

That just shows speed,


Should I have recieved another sheet? This is all i was given.

If i get a Hp tuner log, would you like to look over it ?

[Vettezuki]

Should I have recieved another sheet? This is all i was given.

If i get a Hp tuner log, would you like to look over it ?

The sheet is correct. It's just that the X axis is in MPH not RPM.

Here's one of my old sheets w/ A/F and RPM. These setups take a bit longer (i.e., mo money). This dyno day was for HP numbers basically not for tuning.

http://motorgen.com/pic/data/515/BirdRunDyno1.jpg

[SeanPlunk]

I hope this image is fine. I didnt want to make it too big. If you want it as big as possible, just ask :)

http://img255.imageshack.us/img255/931/carloswestersracetune2dh.jpg

I think Greg hit the wrong value for the x-axis for your sheet. Let me see if I can get him to email you one with the RPM's at the bottom. That dyno sheet is strange though. Both the hp and tq curves look strange to me... It almost looks as if you're losing boost at a really low RPM level...

[Vettezuki]

I think Greg hit the wrong value for the x-axis for your sheet. Let me see if I can get him to email you one with the RPM's at the bottom. That dyno sheet is strange though. Both the hp and tq curves look strange to me... It almost looks as if you're losing boost at a really low RPM level...

My guess is the bump was the momentary overboost, then because of some other engine config, the turbo was loosing effeciency as it climbed in the rpm range (engine not breathing so well). But honestly this is beyond my pay grade. CornFed could probably tell you a lot more from a glance.

[Vettezuki]

I'm working on different layouts of the two cameras to get something a bit slicker. Patience please.

[Vettezuki]

What I wanted to do, while kinda possible, would take A LOT of time. See another test run of what I'm thinking of doing now in the first post.

[Deep-GXP]

What I wanted to do, while kinda possible, would take A LOT of time. See another test run of what I'm thinking of doing now in the first post.

Looks great to me :)


Hey i found out my tire size is...

Factory Wheel+Tire = 245/45/18 = 26.68 = Radius: 13.34


I'll find out the axel size later

[master_1011]

**Subscribed**


Waiting patiently for the videos.

I had my Camera charged up and ready to go...but in my infinite wisdom, I left it at home...

[Deep-GXP]

Factory Wheel+Tire = 245/45/18 = 26.68 = Radius: 13.34

GXP's stock rear end is 3.73:1



Which measurement in particular were you talking about when you asked for axel size ? Pinion?

[SeanPlunk]

Factory Wheel+Tire = 245/45/18 = 26.68 = Radius: 13.34

GXP's stock rear end is 3.73:1



Which measurement in particular were you talking about when you asked for axel size ? Pinion?

I asked Greg for a new dyno sheet for you but I'm not sure he's seen the post yet. I'll continue to try to get a new one for you with RPM's in place of MPH. :drink:

[Deep-GXP]

I asked Greg for a new dyno sheet for you but I'm not sure he's seen the post yet. I'll continue to try to get a new one for you with RPM's in place of MPH. :drink:


Sweet, thank you very much :woot:
Yes it did seem odd to see MPH and not RPM

[blumnday99]

Are those vids coming out in the dyno order? Because I think I'm next...

[Vettezuki]

Are those vids coming out in the dyno order? Because I think I'm next...

Yes.

[Vettezuki]

Check Test Run 3 (http://www.motorgen.com//vid/showphoto.php/photo/800). This is based on some suggestions by Leedom. I wish I had a graphic of the dyno sheets. The video shot of the screen (which was connected by like 50 feet of VGA cable) just doesn't look so hot. After some filters the curve is clear enough, but we aren't going to be able to make out the numbers.

[SeanPlunk]

Check Test Run 3 (http://www.motorgen.com//vid/showphoto.php/photo/800). This is based on some suggestions by Leedom. I wish I had a graphic of the dyno sheets. The video shot of the screen (which was connected by like 50 feet of VGA cable) just doesn't look so hot. After some filters the curve is clear enough, but we aren't going to be able to make out the numbers.

It looks good to me :thumbs_up:

[Vettezuki]

It looks good to me :thumbs_up:

Alrighty then, unless someone else has a clever idea, I'll run with this structure and start cranking them out tonight.

[SeanPlunk]

Alrighty then, unless someone else has a clever idea, I'll run with this structure and start cranking them out tonight.

Sounds great :bigthumbsup:

[SeanPlunk]

They look great Vettezuki, thanks for the hard work.

[SoCalC55]

Alrighty then, unless someone else has a clever idea, I'll run with this structure and start cranking them out tonight.
Cool videos so far! thanks for taking your time to work on all of these... sooo many

[Douglas Mariani]

Cool videos so far! thanks for taking your time to work on all of these... sooo many

I Agree:bigthumbsup:

[Vettezuki]

Thanks guys. I'm going to go add to global warming and further deplete the water supply with a nice Jacuzzi bath and get back on it later for a while.

[master_1011]

Just a thought, but what if you could have the final numbers on the bottom of the screen with the graph?

[Vettezuki]

Just a thought, but what if you could have the final numbers on the bottom of the screen with the graph?

Great idea. Would have done it if I knew the numbers. Unfortunately all I see is a blurry graph when editing.

[silvertermi04]

What are the numbers on the Neon and whats up wth the graphs on the SS and on the BMW.

[silvertermi04]

OHH and that white cobra shits WEAZZEEEK

[Vettezuki]

What are the numbers on the Neon and whats up wth the graphs on the SS and on the BMW.

I want to say somewhere in the 300s for the SRT4. The graphs for the Silverado and BMW had problems for kickdown in the automatic transmission and also I think they were both limited by a speed governor in their 1:1 gear. In other words, red line was well after the computer said no more speed. The nanny state strikes again. I know I feel safer.

[silvertermi04]

Really??? Thats Weak.

[n2osage]

Is there a way I can get a copy of this video or download it? I'd like to keep it...

[master_1011]

9) master_1011 Dodge Charger SRT8 (http://www.motorgen.com//vid/showphoto.php/photo/807)

NICE!!!!...Except that's not mine. I have the other Charger....

[SeanPlunk]

NICE!!!!...Except that's not mine. I have the other Charger....

Sorry, LOL. Do you know what user that is?

[master_1011]

Sorry, LOL. Do you know what user that is?

Not off the top of my head....Artsomething.....I'll find it...


*edit* Asrtive

[Vettezuki]

Is there a way I can get a copy of this video or download it? I'd like to keep it...

Yes, when I'm through with these I'll put up hi-res versions for private download for anyone who asks.

[Vettezuki]

NICE!!!!...Except that's not mine. I have the other Charger....

I believe your next. :huh: Check back late night or tomorrow morning.

[master_1011]

I believe your next. :huh: Check back late night or tomorrow morning.

SWEET!!!

[n2osage]

Yes, when I'm through with these I'll put up hi-res versions for private download for anyone who asks.

Thanks, I'm looking forward to it!

[SoCalC55]

Yes, when I'm through with these I'll put up hi-res versions for private download for anyone who asks.I was just going to ask :bigthumbsup:

yayayayayay

[SeanPlunk]

I'm updating the original post at the videos come up just so everyone knows :bigthumbsup:

[Douglas Mariani]

Thanks Ben :bigthumbsup:

I see that you got my son in laws 2000 Z28 Vert up. Please let me know when I could download a copy.

[SeanPlunk]

Thanks Ben :bigthumbsup:

I see that you got my son in laws 2000 Z28 Vert up. Please let me know when I could download a copy.

Doug, can you remind me again what your son in laws name is? I'm kicking myself, but I can't remember :bang:

[Douglas Mariani]

Doug, can you remind me again what your son in laws name is? I'm kicking myself, but I can't remember :bang:

His name is Ben Eakin #17 2000 Z28 Vert. Sean Thanks again we had a fun day........untill the wifes started :censored: and we had to go home:rolleyes:

[SeanPlunk]

His name is Ben Eakin #17 2000 Z28 Vert. Sean Thanks again we had a fun day........untill the wifes started :censored: and we had to go home:rolleyes:

LOL, believe me - no explanation necessary. I'm married, I know how it is :nutkick:

[SeanPlunk]

Updated OP and users for videos.

[Vettezuki]

We're about half way through. I'll bring in the other tapes today/tomorrow and start putting up the second half tomorrow(ish).

[Vettezuki]

Had to move a bunch of data and other things to get ready for the next batch. They'll start going up again late tonight (Wednesday).

[Deep-GXP]

Yes, when I'm through with these I'll put up hi-res versions for private download for anyone who asks.


Whenever you're done and have some free time, i'd like to download a copy :) If you rather transfer it through AIM/MSN/Yahoo messenger then let me know (may be easier for you, i dont know)

[Deep-GXP]

I asked Greg for a new dyno sheet for you but I'm not sure he's seen the post yet. I'll continue to try to get a new one for you with RPM's in place of MPH. :drink:


Any luck on this Sean? :D

[SeanPlunk]

Any luck on this Sean? :D

No, sorry, I need to ask him again.

[Singha]

Thanks a lot Vettezuki for this great videos. :bigthumbsup:

[Deep-GXP]

No, sorry, I need to ask him again.


Cool man, I appreciate you asking him :) Im gonna PM you my email.

[SIr RicCuS]

Great videos!!!

[SIr RicCuS]

Those Fast Intentions cars are insane!!! I think I'm in love... :)

[SeanPlunk]

Original post is updated with the latest videos - thank to everyone for being so patient :bigthumbsup:

[SeanPlunk]

Done and finished. OP updated :thumbs_up:

[Deep-GXP]

No, sorry, I need to ask him again.


I suppose you can give up if you'd like. I've also tried to contact him with no responce, I dont want to have to drive down there without speaking to him either. I have left a voicemail at his shop and I also e-mailed him but no responce and as I can see you've been trying also with no responce. The Dyno day was back on Feb 21st....almost a month ago. I never thought that asking for my correct dyno graph would be too much to ask for.

Not trying to put anyone down but this is just my personal experience. Kinda sucks too since it was the first time i've ever dyno'd any vehicle.

Thank you Sean for setting up the dyno day, i had a great time and enjoyed having my car dyno'd. Thank you Vettezuki for the awesome video too !!

[Deep-GXP]

Yes, when I'm through with these I'll put up hi-res versions for private download for anyone who asks.

Just wondering if you'd had some extra time :) I'd love to download my vid (Blue Solstice GXP, 5th or 6th video I believe).

[SeanPlunk]

I suppose you can give up if you'd like. I've also tried to contact him with no responce, I dont want to have to drive down there without speaking to him either. I have left a voicemail at his shop and I also e-mailed him but no responce and as I can see you've been trying also with no responce. The Dyno day was back on Feb 21st....almost a month ago. I never thought that asking for my correct dyno graph would be too much to ask for.

Not trying to put anyone down but this is just my personal experience. Kinda sucks too since it was the first time i've ever dyno'd any vehicle.

Thank you Sean for setting up the dyno day, i had a great time and enjoyed having my car dyno'd. Thank you Vettezuki for the awesome video too !!

He's been crushed with work, but I saw him on another board finally posting again today. I'll ask him one more time.

[Deep-GXP]

He's been crushed with work, but I saw him on another board finally posting again today. I'll ask him one more time.

If so, then maybe he'll get around to my email soon. Thanks for trying yet again for me Sean :)

[Vettezuki]

Just wondering if you'd had some extra time :) I'd love to download my vid (Blue Solstice GXP, 5th or 6th video I believe).

Probably about 10 days or so.

[Deep-GXP]

Sounds good Sounds good, i'll check back in 10 days or so :laugh:

[SeanPlunk]

Sounds good Sounds good, i'll check back in 10 days or so :laugh:

I am still working to get a dyno printout for you. I'm not giving up, LOL.

[Deep-GXP]

hahaha , cool thanks :drink:

[Deep-GXP]

Hey, I ended up making my own rpm lines. Not sure if this would be correct. I was able to do this cuz I know Greg ran my car to 7k rpms on the first run and my idle is somewhere around 800 rpms. All lines have equal distance.

Do you think this is correct ?? Or atleast pretty close ?

http://img168.imageshack.us/img168/2889/carloswestersracetune2d.jpg

Crap never mind. I need to fix the graph.

[Deep-GXP]

Ok fixed it :) What do you guys think?

Also, the info on the bottom was cut off when I got the sheet :(